Thanks for all the input there EagleMark.

The bin that I have in Landy 1 seems to work well compared to what I was initially using, and up to now building Landy 2. I was not all that interested in...

Correct, as I stated in my O P the bin came from another person who burned chips for a living. Now I was hoping by posting here with my data someone could identify the problem as a sensor or worse...

I kinda figured that I would need to thats how I ended up here!....based on looking at the data what should be changed first?

My other Landy idles GREAT with this bin......the only differences in the two vehicle setups are the cam and the exhaust size. Beside that every part is identical down to the air cleaner.

I can...

Dave
I dont understand BPW...is there a FAQ or something else I could read to be able to apply this to my situation? And again why bring it up? What did you see in my Data dump that leads you down...

This is a stock Toyota 2F straight 6-256 engine. The bin works great in my other Landy with only differences mentioned above....exhaust size and cam. Would either of these cause this rich running...

I have joined this group because its been awhile since I had a reason to bash my head against the wall in frustration and now seemed as good a time as any!
I have a new land cruiser/GM TBI project...

Thanks for the reply and jumping in here....

I found this on another thread about the Async referring to GM s---"Most are Async fuel and during Async the BLM Learn is disabled, even in Closed...

Hello all....

Attached is data from a run on my 1978 FJ55 Land Cruiser [4 Door Wagon] I just finished restoring this summer. The engine is new/OH and bone stock except for the Cam..I knew I...