Haven't had much time to play with anything, as I have about 5 weeks left in the semester.

Given Kur40 knowledge of EE if he thinks the northstar icm is a step back then it most likely is so I...

It seems member dave w has come up with a solution for the vortecs to run the 0411 pcm. The project looks rather affordable and simple. it requires the use of a vortec distributor combined with his...

the northstar signals fed to icm seems it will be complicated to nail unless we get some good scopes of the 3?
if using the northstar icm will be a step back then,

thinking from a hardware ,...

I will grab a few on saturday and report back.

So from what I understand about the northstar module, it only ever needs 2 of the 3 sensors to actually function. either both crank signals 27*...

I can grab some northstar ignition modules no problem, i bet they would only be a few bucks.

The waste spark setup is perfectly fine.
Northstar's have a different firing order than sbc. ...

Found this site:
http://lukeskaff.com/projects/car/cadillac-northstar-dis-to-gm-hei-sbc-ecm-project/

and a delteq diagram

I like where you are headed. Wouldn't this mean we would have to change the signal coming out of the opti to match the northstar?

There is a junkyard no more than a mile from my house littered...

Well like I said in my previous post, Im no expert, but I'm not a newbie either. If a schematic gets posted that should be enough.

I actually have an arduino that i don't use for anything...

those scope charts are awesome. is this project going to be something someone can easily home brew?

Hey guys been following your thread, I don't understand everything you guys are talking about. Taking some electrical engineering classes this semester have definitely helped but I don't want to slow...