Search:

Type: Posts; User: B52Bombardier1

Page 1 of 4 1 2 3 4

Search: Search took 0.02 seconds.

  1. Replies
    13
    Views
    7,130

    Your 12.2 volts in the third line down above is...

    Your 12.2 volts in the third line down above is on the ragged edge of being too low, especially during the "Write" and erase portions of the PCM Hammer process. I agree with kur4o . . . you need a...
  2. Replies
    14
    Views
    2,559

    Yes, please, what type of PCM? And there's more...

    Yes, please, what type of PCM? And there's more to it than just VATS and oxygen sensors but we can assist.

    Rick
  3. Replies
    1
    Views
    709

    Sounds like you are ready to go and well...

    Sounds like you are ready to go and well equipped. Welcome to the group.

    Rick
  4. Are you flashing a file that has checksum errors?...

    Are you flashing a file that has checksum errors?

    Rick
  5. An XDF for that operating system does not exist,...

    An XDF for that operating system does not exist, at least not that I'm aware. You will likely need to pick a different OS and abandon 2618.

    Rick
  6. Replies
    6
    Views
    1,705

    Yes, probably just a simple tune. Changes to...

    Yes, probably just a simple tune. Changes to your tune beyond that carry risks, extra costs and quite possibly new engine hardware. A new, more aggressive camshaft, LS3 intake manifold, headers and...
  7. Replies
    4
    Views
    1,661

    What PCM and what OS are you looking for . . ....

    What PCM and what OS are you looking for . . . 7603??? The error you post above means the file you are looking for at that URL is no longer available. What transmission in the F100?

    Rick
  8. Replies
    10
    Views
    4,270

    Yes, use 12212156 for the new OS. Sounds like...

    Yes, use 12212156 for the new OS. Sounds like you might need to take the lid off and ground that pin on the board to recover your PCM. I've never seen an XDF for 12216125.

    Rick
  9. LTFT +25, STFT Maybe +5 - Needs More Fuel

    Hello,

    A buddy of mine in an A-body Chevelle with a mildly cammed LS1 motor has a maxxed out +25 LTFT and maybe a 4-5 STFT. I think his tune done by somebody else needs some extra fuel to get...
  10. Read the codes and see if you show "DTC P1638". ...

    Read the codes and see if you show "DTC P1638".

    Rick
  11. Replies
    31
    Views
    8,526

    When you know it is running in Lean Cruise mode,...

    When you know it is running in Lean Cruise mode, what do your Short Term and Long Term Fuel Trims indicate? Is the PCM maxing those values out at +25?

    Rick
  12. The checksum DLL file goes with Tuner Pro RT, not...

    The checksum DLL file goes with Tuner Pro RT, not LS Droid. I never had to pay for LS Droid for Android on my phone.

    Rick
  13. Then you have done something wrong that Tuner Pro...

    Then you have done something wrong that Tuner Pro warned you against or you don't have the correct checksum DLL file installed. If you wish to stick with this BIN file, you can repair it with a...
  14. Thread: Hello

    by B52Bombardier1
    Replies
    1
    Views
    839

    Hello, And welcome to the group. Rick

    Hello,

    And welcome to the group.

    Rick
  15. I use LS Droid and PCM Hammer for the actual...

    I use LS Droid and PCM Hammer for the actual writing of the BIN file to a PCM. Several good You Tube videos explain them both, step by step. For every BIN that I've seen, Tuner Pro RT strongly...
  16. If you don't care that the VIN inside your 1999...

    If you don't care that the VIN inside your 1999 LM7 ECU will change then clone it - cloning will change everything to what's inside your 2156 BIN. I usually clone because we don't have strict...
  17. Replies
    3
    Views
    1,343

    Is it a 512k byte P01 PCM or a 1 megabyte P59...

    Is it a 512k byte P01 PCM or a 1 megabyte P59 PCM?

    Rick
  18. Replies
    3
    Views
    1,265

    There is no XDF for the 6125 OS BIN files for...

    There is no XDF for the 6125 OS BIN files for editing. However, there are other suitable OS BIN files with richly featured XDF support for use and you will simply be overwriting your existing 6125...
  19. Replies
    7
    Views
    2,605

    You will likely need to find an unmolested 7603...

    You will likely need to find an unmolested 7603 BIN or one that does not have the checksum error and start over again. Or use Universal Patcher to correct the checksums. Or, if the older version of...
  20. Replies
    7
    Views
    2,605

    You quite likely don't have the checksum.DLL file...

    You quite likely don't have the checksum.DLL file required for Tuner Pro RT. Do you have the latest Tuner Pro RT version - 11 January, 2022? I think that version includes all of the correct checksum...
  21. Replies
    7
    Views
    2,605

    Hello, Your 5.3 / 4L60E combo is easy in...

    Hello,

    Your 5.3 / 4L60E combo is easy in 7603. That won't be any trouble for you and Tuner Pro RT makes it easy. You will have to know your tire height, rear gear differential ratio and do a...
  22. Replies
    1
    Views
    876

    Hello, And welcome to the group. Rick

    Hello,

    And welcome to the group.

    Rick
  23. Replies
    1
    Views
    815

    Good choice for an engine. And welcome to the...

    Good choice for an engine. And welcome to the group.

    Rick
  24. The choice of the 454 engine makes it tough for...

    The choice of the 454 engine makes it tough for me to give much advice. But with the 0411 PCM, I'd really try to avoid HP Tuners and stick with Tuner Pro RT if at all possible. The problem is that...
  25. Replies
    7
    Views
    2,605

    There are BINS with richly detailed XDF files...

    There are BINS with richly detailed XDF files that support that combo of engine and trans. Which PCM are you going to use? For the P01 PCM, I'm using the 8322 BIN but 2156 and 2088 are also very...
Results 1 to 25 of 100
Page 1 of 4 1 2 3 4