I did not disable pe when tuning my tables good to know.
Type: Posts; User: 92TBIVentura
I did not disable pe when tuning my tables good to know.
I am running gas with 10 percent ethanol that is what is available mostly unless you get premium at some stations. I'll try bumping up those ae map & ae tps values. Should I start with one or do both...
I have a 3 wire o2 sensor on it, so probably closed loop, unless there are some other factors involved for it to go closed loop. Thanks for the reply
Guys I need help with a lean hesitation, for a tbi 305. Has 081 tpi heads, lt1 cam and some other mods. Runs good when started cold till the temp gauge gets to about 140 degrees then hesitates. Once...
You may want to check out my log I posted a few days ago it is a few threads down from yours. My car is running good except for a hesitation when the engine is cold, I am still looking for advise on...
Hey, guys. I have not posted in a while I just moved across the country and have been busy with a new job, house etc.
Before the move i did some tuning on my car. It is a 76 pontiac ventura with a...
Ok Thanks Good to know.
This is exactly what I was looking for! I was wondering why I had no history tables. Thank You!
Ok I changed the AFR numbers from 12 to 11 and then did a few full throttle runs, the O2 sensor volts were a little higher in the .815-.830 range. I am not sure how accurate it is, As soon as I get...
So if I do a data log and My Blm is 128 at 4500 rpm & full throttle, is the engine running the AFR that is in the PE VS RPM table?
I do plan on getting a wide band with data logging software, I...
Ok Thanks Dave, I have a Power Enrich AFR vs RPM table in my bin. Would that be the same? It only goes to 3200 RPM, my shift points are at 5000 rpm. Will my fuel ratio above 3200 be the same as at...
I have done a few data logs and burn 3 chips so far and now my BLM's and very close to 128. The car is idling and running great. But I would like to add more fuel at full throttle, my NB voltage is...
You can use a timing light to check the spray pattern, look for a nice cone shape pattern.
Ok, thank you. I was going to ask how to change the base pulse width...those screen shots are all I need!
As soon as I get some time I will have to spend some time getting to know how tunerproRT...
Dave and anyone else that is interested.
I am not sure how to get the info I need to change my bin from this log.
I only know Win ALDL
I have a .xdl this is a data log after I burned my second...
Thanks I found a thread on how to convert the $42 ads file to a adx and I got it to work today.
I did another data log today and set up the dash etc. I hit the record button and recorded driving at various speeds. Then played it back.
So how do I figure what changes to make to my bin by...
I did some data logging today with WIN ALDL and I burned one chip today. The base BIN is a TBIChips performance chip. The car ran really flat with a stock ASDU bin that Painless recommends. The car...
I got it to work now with WIN ALDL and TunerproRT will recognize it and I can see live data now. I just need to figure out how to get it to log.
Guys I just spent many hours trying to get my aldl cable to work. I even set up my laptop to dual boot with windows 7 and windows XP. I could not get it to work with WINALDL. I had it working several...
Thanks I would really appreciate that, i'll post something.
Thank you I got it to work now. I flashed a few different bins and it runs and starts. Gonna do some datalogging with tunerproRT now.
Hi I am working on a 1976 ventura I swapped in a 1992 Camaro TBI 305 and 4l60. Mods are 086 TPI heads with porting, good dual exhaust no cats, injector spacer, open element air cleaner and adjustable...