Search:

Type: Posts; User: SGMBALD1

Search: Search took 0.00 seconds.

  1. Now I can do some troubleshooting.

    Now I can do some troubleshooting.
  2. I've got Data now!!!!! Here is what I ended up...

    I've got Data now!!!!! Here is what I ended up doing. I plugged a USB cable from the bluetooth to my tablet and then plugged the bluetooth into the ALDL. turned the key to run and connected. Then I...
  3. OK so here is what happened when trying to use...

    OK so here is what happened when trying to use the 10k resister. With the resister crossing pins A and B turned the key to run but did not start. I went to ALDLdroid and connected to the bluetooth...
  4. MQQN28, I am back in town and my 10k resisters...

    MQQN28, I am back in town and my 10k resisters are in. So am I suppose to take a 10k resister and connect pins A and B and then plug in my RDR bluetooth and try to get data that way?
  5. Going to have to order a 10k resister and give it...

    Going to have to order a 10k resister and give it a try. No more Radio Shacks in my area... Thanks for all your help. Will let you know how it goes when I get one in and I get back in town in a few...
  6. plugged everything up this morning and I do not...

    plugged everything up this morning and I do not get a CEL light flashing. I can cross A and B with a paperclip and get the CEL light to flash codes. A you saying cross A and B like I am reading...
  7. Ok thanks. I will pay attention to the CEL light...

    Ok thanks. I will pay attention to the CEL light today when I try it again.
  8. Thanks for testing the file. At least I know now...

    Thanks for testing the file. At least I know now that that is not the issue. I will continue to look at other things... I don't recall my CEL light coming on when I connect the red devil. Are you...
  9. Thanks for responding. Here is the header info...

    Thanks for responding. Here is the header info from the ADX file I am using
    <ADXHEADER>
    <guid>d120581b-445a-4c54-aee0-561b7bd21bac</guid>
    <flags>0x10000</flags>

    and the baud is
    ...
  10. New to all of this and trying to stream data from ECU

    I have a 1988 C1500 with 1227747 ECU. I have a Red Devil River ALDL bluetooth device and ALDLDroid installed on my tablet. The bluetooth device powers up and I am able to connect to it with ALDLDroid...
Results 1 to 10 of 10