Hi Guys
I have been data logging and emulating for approx 2 years with no issues. Just recently, I have been getting the DA Data Error. It will record all day if I idle the engine, but as soon...
Type: Posts; User: fallflight
Hi Guys
I have been data logging and emulating for approx 2 years with no issues. Just recently, I have been getting the DA Data Error. It will record all day if I idle the engine, but as soon...
Application: Marine 350CID
PCM = 16168625
Hello All,
Been trying to tune this application and determined that I need Wide Band O2 data. I have cut/drilled/tapped the water cooled manifold for...
No CCP and EGR has a blocking plate on the intake. I can see your point about deceleration enleanment as the boat cannot possibly have a brake. This could cause some problems. It is funny as I...
Please look at this one. It is from the same trip, literally 2 min after the other that you looked at.
Goes into closed loop much more.....what changed?
Guys,
I am not emulating. Only datalogging. I am going to attach files involved. I attached 2 log files, while short can show what it is doing.
note BLM
Also how low the O2 sensor is...
Where do I look for # of cylinders? I just can get a feel for how this software works other than datalogging.
I might just need to get another BIN. I have the data, can anyone look at it in...
Thanks for all of your input.
Is the incorrect RPM that I see while datalogging also what the computer is using to calculate everytthing or is it for my viewing purposes only?
Thanks,
...
It is the small cap distributor. I dont lknow that it has a tach filter from Howell. I was just over to see them as I live close to them. they didnt mention anything about it, and we discussed this...
The only p/n that I see on it is 1103479 which is 1 number short of the GM nomenclature. Does this help?
-fallflight
Hey guys,
Did some more datalogging and had overlooked a major issue.
This application is my boat.
350 CID
TBI with 16168625 ECM
I had the boat running down the river at WOT. Really...
350 Chevy
16168625 ECM
Application...BOAT
Guys..........
Just want to get your thoughts. I havent had a chance to log this year yet, except for in the driveway. I will this week. Put the...
There is a machined fitting that Howell sells that will allow you to put in an O2 sensor on a boat. That is what I have. I put my water cooled manifold in a bridgeport, milled through the water...
350 Chevy in a boat. Worked with Howell EFI to program the chip as they have done several boats.
Facts:
Timing set to 0 with wire disconnected. There is only 1 vacuum which goes to PCV. Other...
GOT IT......Dont know why but it works now. Logging at last.
1 more question.....I just started my engine and started to log. Seems my spark advance is wierd..... 33.6 on startup? Is this...
Thanks Eaglemark.
One Question..........The only driver that they have on Moates is this
http://www.moates.net/zips/CDM20824_Setup.exe This is the driver that I loaded
Is this the...
I want to thank you all for the advice. It is much appreciate
With the cable unplugged my computer shows no com ports being used. As soon as I plug the Cable into the computer it shows COM...
I am using the ADX and XDF that coincides with $E6 on the Tunerpro defs page. This is for the 8625 ECM. The thing that is upsetting is that I cant verify setting with my old computer as the video...
I ran Tunerpro on my DELL laptop for a long time.Worked fine .My Dell POS computer died and I had to load Tunerpro on my new laptop with windows 7. Cant get it to talk to the ECM. ECM is a 16168625....