Search:

Type: Posts; User: Aksl

Page 1 of 4 1 2 3 4

Search: Search took 0.01 seconds.

  1. Ok, great news, i have downgraded to a firmware...

    Ok, great news, i have downgraded to a firmware 4.5.27 with the ODBLink MX+ (that is the oldest firmwar availabile for this product), and could flash with LS Droid. Yesterday my engine has...
  2. Have just spent money for nothing, as i found out...

    Have just spent money for nothing, as i found out that the odblink with firmware higher than 4.3.0 will not work with ls droid, and mine is initially higher..(((
  3. Dave w, you are absolutely right, can not use the...

    Dave w, you are absolutely right, can not use the 1999-2002 411pcm to control the dbw 2003-2007 DBW gas pedal, bcmTAC and throttle body. If i want to do it, have to get the gas pedal, TAC & throttle...
  4. Even if you repin it?

    Even if you repin it?
  5. Hi Dave, truly not sure, have to figure all of...

    Hi Dave, truly not sure, have to figure all of that out, would appreciate any help, for now I have found limited information on repining the blue/green pcm wiring connectors to work with the blue/red...
  6. Need help finding stock calibration file of 12576106 5.3 DBW to work on 411 pcm 512kb

    Hi, i swapped in a 5.3 DBW engine of a 2004 gmc xl truck and wiring with blue/green connectors of it, the pcm it had was 12576106 w.VATS, so I didn't take it.

    Want to use my 411 512kb PCM from...
  7. I'm trying to log the VE, Spark advance/retard,...

    I'm trying to log the VE, Spark advance/retard, stft, ltft.. I'm running rich, have bad startup and no cold idling (where the truck runs at higher rpm until warms up a little), can't start not...
  8. Hi everyone, well unfortunately i,m totaly stuck...

    Hi everyone, well unfortunately i,m totaly stuck with my project. I have downloaded a few programs for logging, tried to log and record it, did alot ot reading, and from what i understood is that i...
  9. Hello Fast355, if you have a minute to help me...

    Hello Fast355, if you have a minute to help me setup scanxl config or share your knowledge on pid's you use to config map tables in order to see and analyze what changes to make to the tune file, i...
  10. Hello Fast355, sorry for bothering, i wonder,...

    Hello Fast355, sorry for bothering, i wonder, could you please share your ScanXL config file please?

    With set up (configured) tables and graphics that you use..

    Sincerely.
  11. Hey evryone, So, I have been dancing with the...

    Hey evryone,

    So, I have been dancing with the tambourine around my truck today, and found a few problems that I had, due to which I got OBD2 with scanXL not connecting to the interface and ECM....
  12. Ok, if no other advice, i will be dancing with...

    Ok, if no other advice, i will be dancing with the tambourine around my truck this weekend, will report on the results...
  13. I doubt it, checked the calibration, the error on...

    I doubt it, checked the calibration, the error on VATS is turned off, i attach the screen shot and my calibration file.
  14. Ok, thank you! will try to adjust the fueling...

    Ok, thank you! will try to adjust the fueling this way and then just plug back in the MAF.
  15. Hello NISANDA, ok i see, will try to next time i...

    Hello NISANDA, ok i see, will try to next time i go deal with my truck, yesterday i couldn't even got it started to move it, if before it would start with pedal aplied and i could move it, then...
  16. Ok so today i went and tried again with different...

    Ok so today i went and tried again with different calibrations to give it a try, since my battery was all charged. Well with a lot of tries i killed the battery again, couldn’t get it to start and...
  17. I have saved the both calibrations in PDF and...

    I have saved the both calibrations in PDF and transformed to Exel sheet, made comaparison as pdf files, and manualy whent through all of the tables transfered to excel files and copied out the...
  18. Thank you Fast355, since i can not do a...

    Thank you Fast355, since i can not do a comparison in TunerCat, but hopefully TunerCat let`s you print data to .txt or via printer settings to .pdf and compare it, i will compare all tables between...
  19. Hello everyone, so i have been to my track today,...

    Hello everyone, so i have been to my track today, unfortunately it is parked a bit away from my home, and is parked outside. So it is a bit challenging to work on it every time, not always I’m able...
  20. I will be going to my truck today, will try to...

    I will be going to my truck today, will try to upload the newly made .cal files i have, and will report up on the result tonight. It`s -20șC today, but with pedal applied by ± 20% the truck starts no...
  21. What cables are you guys using for data logging,...

    What cables are you guys using for data logging, is there any special feature, or chip, or is it just with support for "J1850 VPW" standard and thats all? :popcorn:
  22. Hello NISANDA, it is nice to hear from you again,...

    Hello NISANDA, it is nice to hear from you again, thank you for the .cal file you have provided me earlier, and great thank you for the update, really appreciate!
    I will compare the files today, to...
  23. Hello PlayingWithTBI, " I don't want to step on...

    Hello PlayingWithTBI, " I don't want to step on this thread, maybe I should start a new one?" - As you wish, but personaly i don`t mind you using this my thread, as long as it give you help & result!...
  24. I see, i will consider it, will watch some...

    I see, i will consider it, will watch some youtube and read about it, thank you, may be I will just buy that. As i understood, i can simply use an ELM327 ODB II wire with it? Is that so?

    I prefer...
  25. Well, thats a hell of a list of engine gens..., i...

    Well, thats a hell of a list of engine gens..., i have only downloaded & uploaded calibration files to cars like smart fortwo brabus calibration, WV Tiguan, TLC200, Nissan NP300, and a few more, and...
Results 1 to 25 of 100
Page 1 of 4 1 2 3 4