ever since I upgraded to android 11 on my phone I can not connect to my ecm using aldldroid
I can connect via TP and aldl scan but when I try to connect using aldldroid I get checksum mismatch
Type: Posts; User: eutu1960
ever since I upgraded to android 11 on my phone I can not connect to my ecm using aldldroid
I can connect via TP and aldl scan but when I try to connect using aldldroid I get checksum mismatch
I made a short video on what you need to get started on data logging OBD1 even though I consider myself a novice I thought it would be helpful, Hopefully more people will contribute to the comment...
That worked, Big Thanks.
Thanks I will give it a try.
Still no luck, I measured 1-5v on the white wire from the WB and hooked it to the orange white wire on the RJ-45 cable I have. I am assuming that the data should show on one of the AD Chanel's under...
Thank You Hopefully I will have some time this week to play around with it.
I am a little confused about hooking up my AEM WB to the 1320 electronics Blue Tooth adapter to data log, Do I use the Blue wire serial output or the White Wire 0-5v output, I know I need to hook one...
I data log my 90 corvette all the time using Tuner Pro and ALDLDroid, try using this ADX file, it should silence the ccm. ...
I finally got around to installing a WB and mad some changes to the PE afr vs rpm and PE spark advance vs rpm, my WB seems to be reading about 12.9 to 13 under wot and throttle response is seems much...
I looked at some of the post on 3rd gen and there seems to be different large cap HEI latency tables for different vehicles. I am thinking of getting a WB and try and do a better job of adjusting my...
Thats OK Thanks anyway, any input is better than no input.
OK but I already have a large cap with the correct bin with the latency table for a large cap, are you saying I should switch to a small cap latency table or are you saying use the large cap latency...
I found a Spark Latency Correction table. from what I have read it is for "It corrects the timing based on the A/C alternator effect of the pickup/ reluctor." and thats about what I know at this point
I do have the large cap, I will look for the spark latency table. thanks
well I made another data log this time with Highway mode disabled and using Tuner Pro RT instead of ALDLDroid.
timing is set at 6* with the bypass wire disconnected and is rock steady, I engaged highway mode a few weeks ago and to disable it I just need to change the mph for highway mode to 255mph, thanks for...
basically when cruising say at highway speeds if I go wot it seems like its slow to respond, lots of noise but throttle lag, almost like turbo lag. I will try the file analyzer.
you will have to excuse my ignorance but cant find injector duty cycle listed in the bin file. I do now my BPW on my data log is about 10.5 when going to about 4000 rpm. under the tables section I...
will give it a look see, with the stock tuned port intake and 113 heads the motor runs out of breath by 5000 rpm. so I am proply ok.
I have a 383 TPI in a 90 vette with a 7727 ecm I would like to tune for better throttle response, whats the best way to go about it as far as making changes in the the tune, so far I have limited my...
In the US all cars after 1996 came with obd 2, this nay help http://www.obdii.com/connector.html
I thought I would update this thread, I found a new old style ac delco O2 on ebay http://www.ebay.com/itm/331712333869?_trksid=p2060353.m1438.l2649&ssPageName=STRK%3AMEBIDX%3AIT I installed it and...
according to this thread on another forum they have a similar proplem with the newer afs75 O2's. when at idle a very narow range witch is what mine seems to be doing....
Installed heated 4 wire O2 over the winter and took vette out for first time with the new O2 and did some data login, noticed the O2 reading are not fluctuating as they should be, so did I get a bad...
just throwing this out there but any chance some thing like digikey would have...