Yeah I'd be open to giving that a shot. I'm also inclined atm to just use this stock tuned ecm that I picked up along with a set of the stock 3400 injectors and see how it runs with those. If it at...
Type: Posts; User: Robindehood
Yeah I'd be open to giving that a shot. I'm also inclined atm to just use this stock tuned ecm that I picked up along with a set of the stock 3400 injectors and see how it runs with those. If it at...
What all do I need?
Yeah, at this point I'm truly just at a loss. I've tried full on cutting the OBD port out of the car and wiring it independently. Grounds are good, it's directly to the serial data line at the pcm...
Trying to dive back in on this after a few weeks away from it.
Using ALDL-Test V230 I've confirmed that the ALDL cable is working on the laptop side of things. It passes all the tests, and I've...
Gonna give this a bump as it's still an on going issue. Starting to wonder if it's a pc issue vs cable/pcm. Anything I can check on that side of things to potentially get this resolved?
I have his flashhack program downloaded, currently just telling me I have aa "Silent Bus" when I try and read the pcm with it.
I'm leaning towards wiring issues as the cable worked once, and I...
I need to get this sorted out, with a baby on the way it's just time.
For those seeing this for the first time and don't want to look at page 1, I've got a 1995 3.4L camaro engine that I'm trying...
I've opened it up, no visible corrosion or burns or anything in either pcm
Going to give this a bump as it's still an ongoing issue. I ordered a replacement PCM to test in case mine was shot and I'm still having no dice reading it. I purchased a new RedDevilRiver cable and...
I'm grounding both wires to the same chassis ground. I've tried it on a ground in the drivers side footwell area as well as a chassis ground in the engine bay. I'm still new to this so the...
Swing and Miss. Rewired it all without using the obd port and connected female ends onto the ALDL cable. Have 12v, good grounds and continuity from the ALDL pin to the pcm and no dice. Can't get the...
Decided to pull the pins on the obd port to check them. Serial Data pin had ALOT of corrosion. Decided to use the other UART pin from the ls1 in it's place. Still having the same issue, so I pulled...
Not having much luck figuring that out. Just keeps saying "bus is silent"
Just ran the flash hack with it plugged in. Says
SER : #AK08HBBZA
VENDOR: 403
PRODUCT: 6001
Yeah its a 16 pin. I'm testing continuity at pin 9 (bottom left),
Im not sure which is the part number on the pcm, but service no. Is listed as 16196742 BPCN
*86BPCNK350540207* is on the...
Hey guys, I wasn't really sure where to post this but here goes.
I'm struggling to get my ALDL cable to receive any information from the car. I've tried connecting with Scan9495 (v6 edition),...
Well, I ordered a new cable and on the 7th of August and it just got here today. Did the drivers, plugged it in and boom. Nothing. I tried your flashhack tool @steveo and it was saying silent bus and...
Still waiting for my new aldl cable to arrive, but I tried using my other one and it was giving me a checksum error. I've had the car running with smaller injectors in the meantime and it runs...
Now I just need to learn what all that means
I'm using the original pcm from my 3.4L. I believe it's the P66. I'm just waiting on a new ALDL cable to come in. Mine worked for reading the pcm one day, and the next it won't register anything....
Hey guys,
Little bit of background on the car. I purchased a 1995 Camaro with the 3.4L in it back in 2010 as my first vehicle. I drove it for a couple years and ended up parking it due to a blown...