Bringing TBI and Multi Port Fuel Injection to a New Level.     EFI Conversions and Tuning! Seattle to Portland! E-mail Tuning Consultant!

Search:

Type: Posts; User: Tom B.

Page 1 of 2 1 2

Search: Search took 0.00 seconds.

  1. You may have a mechanical problem with the PWM...

    You may have a mechanical problem with the PWM valve and bore wear in the valve body. Another issue may be that the PWM (95-newer) transmissions use a different tcc spool valve in the pump. If your...
  2. Replies
    455
    Views
    64,119

    The Delteq does use a Northstar module and coils.

    The Delteq does use a Northstar module and coils.
  3. Replies
    455
    Views
    64,119

    You need to use the 96-97 cover. The crank damper...

    You need to use the 96-97 cover. The crank damper mount is also shorter to accommodate the trigger wheel.
  4. Replies
    10
    Views
    2,507

    I'm glad you didn't have any major damage.

    I'm glad you didn't have any major damage.
  5. Replies
    10
    Views
    2,507

    Try to turn the crankshaft using a socket and...

    Try to turn the crankshaft using a socket and ratchet/breaker bar on the balancer bolt. If the engine will turn fairly smooth you should be OK. I would definitely put some lightweight oil in it and...
  6. Replies
    10
    Views
    2,507

    Did you shut the ignition off or did the engine...

    Did you shut the ignition off or did the engine lock up?
  7. Replies
    455
    Views
    64,119

    The Opti without the high voltage running through...

    The Opti without the high voltage running through it will be just fine. Just clean it up and seal it. The same sensors seem to run forever in the other cars they are installed in.
  8. Replies
    455
    Views
    64,119

    I will say this once and then I am done with it. ...

    I will say this once and then I am done with it. Valve overlap has a lot to do with the way it affects how an engine runs. If your position is to the contrary, I can only surmise you are less...
  9. Replies
    455
    Views
    64,119

    Hey now! We did get a little off topic for a...

    Hey now! We did get a little off topic for a minute. Anyways, I am committed to help you guys find a good, reliable, economical solution. I'm sure Fast 355 will be just as generous with his time...
  10. Replies
    5
    Views
    1,618

    You can get the hardware/software you need from...

    You can get the hardware/software you need from Moates.net and tunercat.com Don't bother with anything from Jet.
  11. Replies
    10
    Views
    2,507

    Get a look at it in the morning. If it didn't...

    Get a look at it in the morning. If it didn't throw a rod and window the block, you should be fine to have it rebuilt. If you have an engine oil cooler something may have failed i.e. an o ring or a...
  12. Replies
    455
    Views
    64,119

    I agree with you about some of the so called...

    I agree with you about some of the so called "Pros". As far as the average tinkerer goes, one example for the trials and tribulations of the LT/LS swap that can screw up a tune is the injection...
  13. Replies
    455
    Views
    64,119

    No sweat. You can download the manual on...

    No sweat. You can download the manual on Delteq's site. http://www.delteq.com/support_manuals.htm
  14. Replies
    455
    Views
    64,119

    Andy, The delteq should be at your house...

    Andy,
    The delteq should be at your house on Saturday.
  15. Replies
    455
    Views
    64,119

    You are one of the few that had a relatively easy...

    You are one of the few that had a relatively easy time. There are a lot of pro tuners that have had nothing but headaches. While the conversion isn't overly difficult, getting the tune right can be...
  16. Replies
    455
    Views
    64,119

    The 411 swap on an LT1takes a lot of tuning. You...

    The 411 swap on an LT1takes a lot of tuning. You also have to put a 1996 and newer valve body in your 4L60E. I am finishing up tuning a 411 swap on my LT4 Hotcam engine that is heavily modified. I...
  17. Replies
    4
    Views
    1,034

    Yes, the ecm is compatible.

    Yes, the ecm is compatible.
  18. Replies
    3
    Views
    1,333

    You get to experience the pleasures of a 1 year...

    You get to experience the pleasures of a 1 year only configuration. I will help you any way I can. I am sure the rest of the guys here will as well.
  19. Thread: www.moates.net

    by Tom B.
    Replies
    3
    Views
    7,748

    Shameless plug. I have been using their products...

    Shameless plug. I have been using their products for over 10 years. They truly know how to do business and take care of their customers.
  20. Replies
    4
    Views
    4,640

    I know this is an old thread. I had to deal with...

    I know this is an old thread. I had to deal with Howell several years ago. their Jeep efi kit was based off a GM 2.8 V6. The thing out of the box ran rich and was a complete disaster. After...
  21. Thread: GM IAC issues

    by Tom B.
    Replies
    1
    Views
    836

    Sounds like maybe a glitch in the ecm. Do you...

    Sounds like maybe a glitch in the ecm. Do you have access to another ecm?
  22. Replies
    4
    Views
    1,034

    Bonjour Claude, The simple harness can be...

    Bonjour Claude,
    The simple harness can be crafted easily from a factory harness from a junk yard. The computer can be configured for the manual transmission without much difficulty. I have...
  23. Replies
    455
    Views
    64,119

    I have the Delteq convertors if you want to...

    I have the Delteq convertors if you want to dissect one. PM me with your address if you want to look at it. I will say the only major flaw was the sealing and lack of a superior heat sink. The unit...
  24. Thread: FITech systems

    by Tom B.
    Replies
    24
    Views
    8,889

    Thanks for the heads up. I don't do any social...

    Thanks for the heads up. I don't do any social media. I will have to get one of the kids to look it up. Team Chevelle has a huge FiTech support group as well.
  25. Replies
    455
    Views
    64,119

    The delteq was the work around because of the...

    The delteq was the work around because of the driver issue. The system was developed over a decade ago. The beauty of the system was no programming changes were necessary. The average guy could...
Results 1 to 25 of 37
Page 1 of 2 1 2