Bringing TBI and Multi Port Fuel Injection to a New Level.     EFI Conversions and Tuning! Seattle to Portland! E-mail Tuning Consultant!

Search:

Type: Posts; User: delcowizzid

Page 1 of 4 1 2 3 4

Search: Search took 0.01 seconds.

  1. Best thing about the 1227165 is it can run a lot...

    Best thing about the 1227165 is it can run a lot of different code bases and can have 8192 baud fast data logging with a tune swap .can be maf or map and tbi or pfi. And has some custom code made for...
  2. Replies
    7
    Views
    162

    Backfiring out the intake is it being lean when...

    Backfiring out the intake is it being lean when you stab it it doesn't have enough fuel for the sudden blade opening and big gulp of air it gets
  3. Test them with an ecu running on them from what I...

    Test them with an ecu running on them from what I remember they have the retard built in for limp home mode running and ahouldnt have the timing shift if the are in est mode being controlled by the...
  4. Replies
    12
    Views
    674

    The adaptor you linked won't charge the tablet...

    The adaptor you linked won't charge the tablet they provide power to whatever is plugged into the usb like hard drives etc as far as I've searched you can't charge via otg .people have tried with...
  5. Replies
    25
    Views
    890

    When you are flashing it do you have a separate...

    When you are flashing it do you have a separate switched ignition to the ecu so it has both solid 12v and switched 12v because you need to key off the ignition power while retaining the constant 12v...
  6. Replies
    1
    Views
    270

    Or if someone has a bin file they have read off a...

    Or if someone has a bin file they have read off a unit so i can work on an xdf would be great
  7. Replies
    1
    Views
    270

    Mefi-4 xdf and adx

    Does anyone have an mefi 4 adx and xdf I could grab a copy of I have the software to read and write with an aldl cable but only have the mefi-3 adx and no xdf.
  8. Replies
    7
    Views
    382

    Big one is make sure you have resistor spark...

    Big one is make sure you have resistor spark plugs fitted and carbon leads not copper core leads.and if the usb cable is detachable try another one with a ferrite choke on it
  9. Replies
    16
    Views
    670

    Dyno makes life so much easier this was a dirt...

    Dyno makes life so much easier this was a dirt track car with a v6 block that i road tuned in a paddock with wideband vs an hour on the dyno cleaning up only fueling nearly 40hp gain and 75 ftlb of...
  10. Replies
    0
    Views
    147

    Ostrich 2 wanted

    Anyone got an ostrich 2 they no longer use.i swapped mine for a wideband years ago thinking I wouldn't need it again I was wrong lol
  11. It's to stop interference on all your sensor...

    It's to stop interference on all your sensor signal wires it can play havok with ecus when not running resistor plugs that's why they use them stock on efi and don't run solid copper wires for the...
  12. Also check you have resistor spark plugs none...

    Also check you have resistor spark plugs none resistor ones can knock logging out completely
  13. Replies
    76
    Views
    5,140

    Eoi spreadsheet here if anyone is interested in...

    Eoi spreadsheet here if anyone is interested in calculating eoi verses valve events https://pcmhacking.net/forums/download/file.php?id=9851
  14. Replies
    4
    Views
    811

    Oh nice feature

    Oh nice feature
  15. Replies
    4
    Views
    811

    The trimming will probably be wrong at high...

    The trimming will probably be wrong at high throttle openings
  16. Replies
    3
    Views
    575

    sometimes the long runner manifolds need a...

    sometimes the long runner manifolds need a substantial dip right at max torque where the runners are working the most efficient and just dumping in airflow then you can ramp it straight back in as...
  17. Replies
    14
    Views
    1,672

    Ae is pump shot PE is like the powervalve on a...

    Ae is pump shot PE is like the powervalve on a carb richens high load.most of the stock stuff with PE that i tune comes on at 50%throttle unless at high rpm I normally cut it back a lot to 25- 30...
  18. Replies
    6
    Views
    900

    I have heaps of different aussie bins if you need...

    I have heaps of different aussie bins if you need others
  19. Replies
    6
    Views
    900

    https://pcmhacking.net/forums/download/file.php?id...

    https://pcmhacking.net/forums/download/file.php?id=2465 that's a vx commodore 2002 model should have lean cruise 12225074 OS if it doesn't let me know and I'll fire up the pc and find one
  20. Your first picture looked like you had one cell...

    Your first picture looked like you had one cell as a positive number but it was just the red on blue background I couldn't see the - sign in from of the 5 on my phone lol
  21. I think it's cause he had 5 in that cell not -5...

    I think it's cause he had 5 in that cell not -5 like your table has
  22. Good to see you are making headway its lots more...

    Good to see you are making headway its lots more fun when you are seeing results and everything starts to gell
  23. Max ve is at max torque

    Max ve is at max torque
  24. Fixing all the error codes will be a good start...

    Fixing all the error codes will be a good start est error means its probably not controlling timing the high map code could stop it even reading the map sensor and run off a default table like a lot...
  25. Compare the o2 voltage thresholds table to the...

    Compare the o2 voltage thresholds table to the stock amyb_88_f-car bin copy it into your bin looks like that tables telling it what o2 volts to expect for 14.7 fueling. and the int delay base which...
Results 1 to 25 of 100
Page 1 of 4 1 2 3 4