Thanks!
Type: Posts; User: mike327
Thanks!
What input signal do I need to run the oem speedometer 2000 ppm 4000 ppm ?? The signal will be coming from TCI Trans controller. I can change the output from tci to either or. I've been told that...
Thanks Dave.
I found the cause of the sudden SES light code 43, self inflected problem. LOL! I had unpinned several wires from the ab connector on the ecm several weeks ago to untangle some wiring...
Dynamic EBl is throwing a code 43, ses light is coming on after engine is started. I have checked all the connections and don't really know which way to go from there. The engine is a LT1 with carb...
Thanks for clearing that up for me.
Hey guys I want to add a vss to my ebl flash. I need a little guidance on what to get and where to get. I have a th350 with a Dana 300 transfer case so the vss will need to be inline with the speedo...
Update! The Jeep has been running great as for as daily driving goes. It still needs a little work as for as performance goes. It just does not have the acceleration that the carb had. Why does my...
Just a quick update. Jeep has been running fairly well this past week. I've had it on the gulf coast @ cruisn' the coast, riding up and down the beach looking at all the cars in town. A ton of cars...
Ok time for update. I ran 12 gage wire for power,changed the relay to 12 gage also and ground, no voltage loss like I had before. I did not run new fuel line yet but plan to plumb with 3/8's hard...
Ordered some seal tite connectors and a few other parts from Dell City. It will be about a week before I can get back on this...work calls.
After taking a look this morning the fuel line is 5/16 from the tank to firewall. I adapted to 3/8 to the tb and back to the return at the firewall which goes back to 5/16 to the tank. Ughhh! I have...
I did check the ground and it had a 0.3 voltage drop. The pump is grounded to the body. I have the battery to block, block to frame and body to block grounded with short battery cable. Now fuel line...
Ok, installed the new fuel pump. Checked voltage drop as per video and had a .8 drop with key on engine off. Checked voltage with the engine running and had a 1.5 voltage drop. If I check voltage at...
I used the instructions in the EBL manuel to figure fuel pressure based on 290 to 300 hp. It seemed a little high to me but I am new to this. When i get the fuel pump issues resolved, i will revisit...
Thanks thats not the way I checked the voltage. I will be replacing pump with a Delco pump and check voltage as in video and see what happens.
I have went through 4 fuel pumps in about six months time. I am running a LT1 that has a carb intake with stock TBI throttle body, Howell harness, EBL PCM. This is in a 90 Jeep YJ that orginally had...
Any of you guy attend CTC on Mississippi Gulf Coast?
http://www.cruisinthecoast.com/
Last year they had around 5 thousand registered cars and about that many more that don't register. Cars come...
Somebody has compiled a LOT of info on this site, makes my old head hurt.
You are correct! I added the 9 so maybe it will not cause problems in the future if someone else reads this. Ok found the adx file maybe I can data log when I get back on land again.
Thanks
OK guys...service no. 16197427 BTWX
on the chip it has BJYK_$0D the pcm has been modded to run TPI. What exactly the mod was I don't know.
I have been using Datamaster and winaldl to...
Thanks for the reply guys. When I get home from offshore I will get service number off the computer. The truck does have a 4L60E ( the reason we did not go with EBL). I bought the pcm from the guy...
Ok! time for my first question, but first a little back ground info. I am working on my teenagers 1995,1500, 5.7 TBI converted to TPI. He did the conversion for looks and school project. The problem...
http://i23.photobucket.com/albums/b366/mike327/IMG00176-20110614-1811.jpg
You must have been a CB :thumbsup: I'm a little north in Hattiesburg but frequent the coast.
Hello guys! another noob here. Been working on a 90 Jeep with a TBI sbc conversion with EBL Flash. I also have a 95 Chevy 1500 with a TPI conversion that my son and I were partners on until he left...