Search:

Type: Posts; User: PlayingWithTBI

Page 1 of 4 1 2 3 4

Search: Search took 0.02 seconds.

  1. Replies
    6
    Views
    565

    If you're talking about using Vortec heads, Chevy...

    If you're talking about using Vortec heads, Chevy Performance makes a TBI manifold for them - just sit down before you look at the price :yikes:

    https://www.summitracing.com/parts/nal-12496821
  2. Replies
    6
    Views
    335

    Yes but, IIRC the 95 was the only year with PWM...

    Yes but, IIRC the 95 was the only year with PWM in the trans.

    BTW @Moss95 welcome to the dark side! :jfj:
  3. Replies
    19
    Views
    1,594

    This^^^ The EBL has the capability of updating...

    This^^^ The EBL has the capability of updating the log up to 17 Times/Second.
  4. Replies
    15
    Views
    2,218

    FYI - the EBL uses the .xdf files, in TunerPro...

    FYI - the EBL uses the .xdf files, in TunerPro RT, other GM cars/trucks use. The EBL does have its own form of an .adx - it's the What's Up Display. That's used for data logging but, Tuner Pro RT...
  5. Replies
    45
    Views
    5,248

    Maybe go to the "Digital" dashboard option. You...

    Maybe go to the "Digital" dashboard option. You can modify/customize each "Gauge" by right clicking on it and selecting what you want. Here's an example of mine on my Laptop.
    19372
  6. Replies
    6
    Views
    912

    Well, not in Tonopah, a few miles East of the...

    Well, not in Tonopah, a few miles East of the great Metropolis but, my address still say Tonopah. Heber's a nice area and a lot cooler. do you come South for the winter?
  7. Replies
    6
    Views
    912

    :welcome: from the west valley of AZ! Cool ride!

    :welcome: from the west valley of AZ! Cool ride!
  8. Doesn't TPI ECMs require the 10K Ohm resistor...

    Doesn't TPI ECMs require the 10K Ohm resistor across pins A and B?
  9. Replies
    4
    Views
    799

    Your EBL should come with a CD containing "start...

    Your EBL should come with a CD containing "start up" .bins If you don't have that you can download them on their website.

    There's a whole thread (102 pages and still counting) dedicated to the...
  10. Replies
    4
    Views
    1,523

    I've been thinking about putting one on my 88. ...

    I've been thinking about putting one on my 88. It gets hot around here in the desert to the point I almost need a "winter" tune and a "summer" one. With the IAT, I can adjust timing based on air...
  11. Replies
    4
    Views
    1,523

    OOPS! I forgot IAT23 :mad1: 19145

    OOPS! I forgot IAT23 :mad1:
    19145
  12. Replies
    4
    Views
    1,523

    Go into Flags in your parameter tree and uncheck...

    Go into Flags in your parameter tree and uncheck these, see if that works :happy:
    19144
  13. Replies
    19
    Views
    4,096

    It is fun to play with it. Just a suggestion;...

    It is fun to play with it. Just a suggestion; anytime you make a change in the .bin, change the PROM ID number and save the .bin with the same #. Then flash it to another bank and try it out. If...
  14. You can send them out to be cleaned and flow...

    You can send them out to be cleaned and flow tested. Then scribe an equivalent number on them so you can readily recognize them when mixed together.
  15. Replies
    19
    Views
    4,096

    Any bank will work, maybe start at bank 0 and...

    Any bank will work, maybe start at bank 0 and work your way up. Did you set your PROM ID number? As you modify/tune your .bin you can increase your PROM ID by 1 digit so you have a history of your...
  16. Replies
    19
    Views
    4,096

    In a nut shell, connect your laptop to the EBL,...

    In a nut shell, connect your laptop to the EBL, match your Comm Port with your Laptop, with KOEO, look to see you're connected. Click on Display, flash, Select bin, OK, select bank. Then click on...
  17. Replies
    19
    Views
    4,096

    Yes, in Scalars go down to "EGR - CTS Enable...

    Yes, in Scalars go down to "EGR - CTS Enable Threshold" and set it to ~150, hopefully your engine will never reach 150° C
  18. Replies
    19
    Views
    4,096

    What "calibrator" are you using, the latest...

    What "calibrator" are you using, the latest TunerPro RT, I hope?

    Where you quoted the part about injectors and fuel pressure, it looks like you're reading from "Introduction to Tuning Part 2. ...
  19. Replies
    19
    Views
    4,096

    I'd start with the Vortec (sp) file. IIRC I...

    I'd start with the Vortec (sp) file. IIRC I started with the EBL_F_3000.bin file. YMMV
  20. Replies
    26
    Views
    3,946

    Meh, I just used Teflon tape, had it on for ~4...

    Meh, I just used Teflon tape, had it on for ~4 years now with no runs, drips, or errors :rockon:
    19060
  21. Yep, a "28 PSI" spring. I have one but can't...

    Yep, a "28 PSI" spring. I have one but can't remember who I bought it from. Here's a quick search...
    https://www.amazon.com/Throttle-Body-Shop-SILVER-Pressure/dp/B012XLK1XE
  22. Replies
    7
    Views
    2,825

    You need to turn off; Closed Loop Threshold by...

    You need to turn off;
    Closed Loop Threshold by setting min CTS to 150+
    BLM Max/Min to 128/128
    Hiwy min coolant to 150+
    EGR CTS Enable Threshold to 150+

    In case you're not aware, here's a...
  23. Replies
    7
    Views
    2,825

    Your EBL P4 is a little different than my...

    Your EBL P4 is a little different than my Flash-II but, when I do the VE Learns I lock INT and BLM to 128. When VE Learn is enabled, it automatically adjusts cells in the VE Table, then, when you're...
  24. Replies
    7
    Views
    2,825

    FWIU, when you do the VE LEARN, it adjusts the VE...

    FWIU, when you do the VE LEARN, it adjusts the VE table to dial it in. Running in CL, the VE table is used as a base and the INT/BLM adjust off it. If it's more than 12% off, the EBL can't adjust...
  25. Replies
    11
    Views
    2,977

    Maybe you pinched an O-ring on one of the...

    Maybe you pinched an O-ring on one of the injectors? You can shine a flashlight down behind the injector, while running, and look for an even spray cone with no drips.
Results 1 to 25 of 100
Page 1 of 4 1 2 3 4