In Tunerpro try testing using Tools - Preferences - Click the Data Acq.Emulation tab at the top of the pop up box - then click "Configure Plug In Component" - Then "Test For Valid Interface Using...
Type: Posts; User: phonedawgz
In Tunerpro try testing using Tools - Preferences - Click the Data Acq.Emulation tab at the top of the pop up box - then click "Configure Plug In Component" - Then "Test For Valid Interface Using...
Glad to hear you got it working. Weird that you had to roll back the driver to make it work. I ship the latest drivers along with my cables and they are FT232RL based. FTDI has it's drivers...
The CDM 2.08.14 driver is contained in my zip file. It is in the GM USB Cable\Win x32 x64 ALDL Cable Driver install program directory
Looks like the drivers aren't there anymore. Are you looking to download old drivers that might support suspected counterfeit chips or are you looking for the latest drivers?
Please note - If...
The bin file is not needed for data logging. Only the .adx file.
Yes this one works for the 87-88 2.5 Iron Duke Fiero.
Pins 4 & 5 are ground. Pin 9 is data. No 10K resistor is needed. Yes pin 16 is 12v if needed.
You will only be able to scan your VY Commodore. Use TunerPro RT and the .adx definition for the...
PM replied to
The data speeds that the GM OBD1 ECMs output is either extremely extremely slow (8192 baud) or extremely extremely extremely slow (130 baud), compared to the limits of the chips used (3,000,000 baud-...
You can try pulling up a terminal emulation program and trying out the port. Due to the nature of the wiring needed, you should get an echo of the characters sent. If instead you get null...
If you can't set the baud rate to 8192, don't plan on it working.
It is illegal to sell pirated clone chips or cables made with pirated clone chips in the US. You could end up in criminal or civil trouble.
From the negative attitude I got from FTDI when I...
Like this - http://www.ebay.com/itm/Mitsubishi-USB-DSM-Scanner-Cable-1G-Eclipse-Datalogger-4g63-ALDL-OBD1-PLUG-/221761687519?hash=item33a206cfdf&item=221761687519&vxp=mtr
Not me btw.
The one...
The diagrams for making a DSM cable start with a Rs232 serial port board and then they add the diode and resistors. Actual RS232 ports operate at a + or - 15v. The cable you show is for a TTL level...
Thanks
Does anyone have the part numbers for the terminals of the newer GM PCM connectors? Terminal as in the metal piece that crimps on the end if the wire and slips into the plastic connector.
Not the...
Looking to modify the Lotus $74 1228708 adx file to be used bluetooth but it has a password on it. Anyone have any ideas on this?
...
There are three types of people in this world. Those that can count and those that can't.
Ok scratch the above question and replace it with - I have 24 pin carriers here but what I need to source...
1227748 for sure is one that uses the 32 pin black carrier. I thought others did also but maybe not.
No sorry for not being clear. The piece on the left on this pic. I have a source for 28 pin versions but not for the 32 pin version.
7656
Who sells new 32 pin black PROM carriers? I do know who does on the 28 pin version but anyone know who does for the 32 pin version?
My bench 7747 running ASDU connects right up without the 10K in place.
If your cable fails TunerPro RT's self test (test with the cable plugged into the laptop but not plugged into the vehicle)...
Cool cool
Will this work with a 4T60E?
I'm running a 7730 in my Fiero but I am running it stock 2.8 and a MT.
Ryan Gick - sp1@gmtuners could burn you a chip if you are interested in purchasing a tune.