Ah ok, no problems. I've got plenty to keep me busy int he meantime haha.Thanks again for all your help with this.

I'm using the EFI connection one on a 400SBC block. We put a fairly liberal amount of RTV sealer on it, but it may have just been a bit too much oil in the pan and pressure blew it out.I'll tool...

Hey LRT,
I got the flash chip adaptor, so I'm good to go with the COS1 tune if you have a copy?
I was going to get the roadworthy done on the car tomorrow but yesterday afternoon I revved the car...

Hey LRT, Work has been a bit full on so I haven't had a chance to touch the car yet, but on the weekend I'll do some logging and drain some of the oil.

Yeah, sure, thanks.
I'll set up the car pc this afternoon so we can log, and I'll drain some of the excess out just to see if it makes an immediate difference.

https://youtu.be/08F3poNtivo
http://i765.photobucket.com/albums/xx293/evilstuie/temporary_98.jpg

Hey mate,
Sorry for the delay getting back to you, new years wiped me out for a day.
This one is much better, I also found it helps to have PIN42 on the harness to trigger the thermo fans. I think...

This one starts easier but doesn't idle on its own.It always takes me 2 attempts to start it so i think i have the distributor on TDC intake instead of exhaust, but second attempt starts almost...

Oh, and there's a P0102 code

Hey LRT,Its a lot better than before! :)
It idles a bit rough, but without any throttle which is awesome.
I still need to give it a little throttle on ignition, so maybe a little more cranking air...

Awesome! Thanks so much for this :)

Yes, set to 58psi, with the vacuum attached and 2.77 gears.

Hey LRT, The injectors are 28lbs LS1 injectors - part# 12561462Let me know if you need any other info :)

Thanks so much for that!!!
I'm in Melbourne for another 2 days, but I know most of the details.
No MAF
Return style rail
One knock sensor on left side of motor, TPI 350 style
Trans - no gear...

Yeah sorry, I'm using the 8 LS1 coil pack setup, vortec distributor is just for cam position.

I haven't looked into the OS flash yet, but I think the Dimented flash tool allows for this yes?
Does the .Bin file include the OS or can i get that from somewhere else to run?
I'm not 100% sure...

Oh ok, I'll have a look after work and see if I can find one on crazyholden.com or something.
Cheers.

Hi Dave,

Sorry I didn't get a reply notification and was checking through old posts.

That would be great if you could.
I'll try to upload it tonight.
I think if I can get the fuel and spark...

Anyone?

Hi Guys,

I seem to have backed myself into a bit of a corner by not doing enough research and trying to find the cheapest route to tuning.
I went and bought an AVT-852 cable thinking I could use...