Thanks guys. I will take a look at everything you guys posted. I will make a chip for both bins and give them a try in the burban maybe tomorrow, raining in sunny so cal today.
Printable View
Thanks guys. I will take a look at everything you guys posted. I will make a chip for both bins and give them a try in the burban maybe tomorrow, raining in sunny so cal today.
Ok, to turn off TCC all i need to do was set the (Min temp for TCC lock) to a max 147'C.? my bin has min temp set to "0", Doesn't explain surging but maybe it caused everything else go out of wack... The motor surged in neutral and park until i did reset. hmmm.
That's not right either! Greg found to many weird things wrong with that bin! Chuck it! Did you find it here that way or was it stock when you found it? My goal is to only have known good chips in ECM information threads. We have a major dump of bins for questionable or only thing available etc...
This bin was downloaded from here then i modified it to hopefully disable TCC. i changed the file name to have th400. sorry for the confusion.
http://www.gearhead-efi.com/Fuel-Inj...ull=1#post2611
I have been doing some comparing between bins and noticed some odd thing i don't under stand. There are Table that look like this (---fuel---) and they normally have a single value, and most of them seem to say 127.00 or 121.00. what are these tables for? the reason i ask is that on my bad ASDZ bin they all say 159.00. :rolleye: :mad1:
Those are just separators between parameter type. don't worry about those.
BIN from the stock chip.
wow, none of the ROM looks anything like the rest of the files I have.
EDIT: OHHHH. That's why, Mask ID $40? Looks like the whole .bin is just ????wrong????
I can't even find a $40?
So is that the file he got from this website is wrong? If so I will delete it... or is it wrong after he made changes? I really don't want bad bins floating around.
Deleted... But that was a copy of the stock chip pulled from the G20 ECU. and it said ASDZ. And it ran fine other then the TCC. Wierd. Could i have screwed up coping it. I burned 4 chips with different BINs. Hopefully I can get this thing to stay running tomorrow, if its not raining.
Man if my truck didn't run in the rain I would have to fix it? :laugh:
Must have read it wrong? Something was wrong! It was not even close to anything being correct... you should really only need one bin, mine! :rockon:
Mark
Your 1leg bin youposted above is for th350 trans? So should work with my th400 I'm not worried about kickdown now. I just need this thing to run.
No it's 700R4 that I made changes to disable TCC and ran in a turbo 350. So it will be fine with yours except the Turbo 400 Kckdown I have never tested.