Printable View
ok so truck runs with the bypass wire plugged in but around 2k rpms and 4k rpms it spits and sputters in between its fine. i dint have an o2 sensor hooked up. could it be the o2 or plug wires or plugs. also could it be my cam? cam is lunati voodoo 437-454 lift 250-256 advantage duration. important running it on stock ecu no chip
ok truck runs with the bypass wire plugged in now but at 2000 and 4000 rpms it sputters and wont come out unless i give it more gas. in between 2 and 4 it runs fine. could it be my cam? 437-454- lift 250-256 advertised duration. im running it with stock prom
truck runs with bypass wire plugged in. but at 2000 and 4000 rpms it sputters and wont come out un less at full throttle. cloud this be because of my cam?
truck now runs with the bypass wire plugged in. but at 2000 and 4000 rpms it spits and sputters only when driving. between 2k and 4K runs great. don't have an o2 sensor hooked up. could this be my problem or is it my cam. cam is 436-454 lift 213-219 duration 112 lobe separation. running stock prom
sorry about all those replys didnt see them getting posted
i think i got it had a melted plug wire