LS1 Power Distribution Module

I recently finished putting together a Power Distribution Module (PDM) for a LS1 engine swap for a 47 Chevy.

The PDM has the following circuits:
Electric Fan 1 Relay and Fuse
Fuel Pump Relay and Fuse
Ignition Relay and Fuse
Brake Switch Relay and Fuse
A/C Compressor Relay and Fuse
A/C Clutch Diode
A/C Pressure Switch bypass Resistor
Bank 1 Fuse
Bank 2 Fuse
Sensors Fuse
PCM Ignition Fuse
PCM Battery Fuse
Cruise Control Fuse

dave w

Looks good

Nice work and nice car...

Bitchin car!
That distribution module is really nice, where did that come from?

Quote:

---

Originally Posted by blue68deville

Bitchin car!
That distribution module is really nice, where did that come from?

---

There are dozens of parts in the PDM. I sourced the parts I used from Mouser.

dave w

http://www.mouser.com/

http://www.mouser.com/Search/ProductDetail.aspx?R=PDM21001LXMvirtualkey57610000 virtualkey576-PDM21001LXM

Thanks!

Cool swap!

I always like to see different PDM styles... Here's an aux I have for all the added on electrical in my Suburban
Attachment 8186

Attachment 8187


Attachment 8188

Quote:

---

Originally Posted by 1BadAction

I always like to see different PDM styles... Here's an aux I have for all the added on electrical in my Suburban
Attachment 8186

Attachment 8187


Attachment 8188

---

How many buss bars are available in that Bussman Product. Maybe two buss bars, one for ignition (on / start) and one for battery "+"?

dave w

It can be ordered in multiple configurations, and setup differently in each configuration. They are very flexible. This particular one has 2 buss bars, 5 relays and 10 fuses.