Printable View
Hello, do I still need to offset the chip start>end address for the 4k file on a 27SF512 when using a Moates G2 adapter? I read somewhere about the unused pins being tied together on the G2 self changes the chip address, and that had me 2nd guessing. How about when using an Ostrich 2.0 through the G2? Thank you!
Link to Moates.net Programming Chips with Offsets: https://www.moates.net/documentation...entation_id=75
dave w
So yes, yes it does.
Yes, you still need to program the EEPROM with the proper offsets, then the hardware offset (shorted pins) allows everything to work together.
Gearhead-efi link for DIY 1227747 conversion to the 27SF512 chip. http://www.gearhead-efi.com/Fuel-Inj...ion-(27SF512)&
dave w