Printable View
hey guys my brother and I just bought efi live flashscan tool. I looking for specs on tuning my 01 chevy silverado 5.3 only has a cold intake and a super 10 exhaust just looking to add some more power with the tune and dont know what to change the numbers to. if anybody could help that would be awesome or could give me the program page with it already set on the page. Any help appreciated.\
thanks chevy01
Most people do not just give out their tunes. Also every engine/vehicle/driver is different and no two optimized vehicle tunes will be the same. GMs tunes are pretty generic. Not a lot of timing advance and pretty rich throughout. Are you running a wideband oxygen sensor to keep tabs on the air/fuel mixture? I would recomeend one, especially for the novice tuner.Quote:
Originally Posted by chevy5.3
OK well I'm looking for what charts or tables to Change and like how much should I change themQuote:
Originally Posted by Fast355
Thanks
There are several sequences of videos on Youtube that might be a good intro for you. Calibrated Sucess comes to mind.Quote:
Originally Posted by chevy5.3
I would suggest studying. Anyone can buy software. That doesn't make them a tuner. We were all new at one point. It's not just plug and play. The first trick on learning to tune. Is knowing how a engine works. Make changes on only the tables you understand. Might help out to get a base tune. Then you can modify off that.
Quote:
Originally Posted by chevy5.3
Tell you what. When I was new I had an awesome mentor that would have done this for me.... Post up the stock tune and I'll mod it. It won't be a full on performance tune but it will show tables to work on and things to look for. Just compare the stock and mod tune. Email it to me and I'll post up here. Tuning@Team208Motorsports.com