Printable View
I cannot figure out how to create idle blm history tables! Ultimately, I'd like to only use data when idle timer is activated and using idle ve table. is that possible? I can't figure out how to construct the argument to make that happen. i bricked and had to wipe and reinstall tp once already trying....
Ron
What definition are you working with?
$OD, $OE, $E6, & $31 have idle flag in the exported .csv file.
dave w
Hi Dave,
$A1 is the code mask I'm working with.
Ron
Hi Ron,
I have not worked with $A1. Maybe you can post a $A1 .csv file I can look at?
dave w
Hi Dave,Quote:
Originally Posted by dave w
Here's the $A1 files and a log too, in order to see how the idle works. $A1 seems to use both speed density and alpa-N both, blended at some point, but I can't figure out where. My thought process is that, short of completely blanking out main ve, I could defign a table that only picked up idle activities.
Any help is MUCH appreciated! I'm in too far anf can't see the forest through the trees.
Ron
the site won't allow csv uploads. hmmm?
hopefully you can pull what you need from the log and other defs.
Ron
I exported the .csv from the .xdl, thank you for posting the .adx file.
The attached .zip has an excel spreadsheet with the TPS and MPH sorted, assuming 0% TPS and 0 MPH = Idle.
I was not able to "crunch" the data, hopefully the attached excel spreadsheet will help you.
dave w
Based on the spreadsheet posted, the Idle Averages (TPS% = 0% and MPH = 0) are listed below:
Tach = 900 RPM
MAP = 40.9 KPa (fair, 35 KPa would be better)
Spark Advance = 25.4 degrees (seems mostly normal, perhaps 20 degrees would be better or worse?)
BLM = 114 (poor, 128 would be ideal)
The correction factor for 114 BLM is 114/128 = 0.89. So try multiplying the VE value for cell 900 RPM's ~ 40 KPa by 0.89 to get the idle BLM averages closer to 128. Let's see what happens after correcting the VE table, before making changes to the spark table.
dave w