Weird Values in TPRT While Viewing Bin

Hey everyone.

This is my first real time using TunerProRT. I figured i'd start learning by taking the bin from an ARJT prom i had. I'm using Moates AutoProm to read the proms. I finally was able to pull the bin from the prom and save it, then after trying many different definition files, i was able to see some values. But the values are all effed up! I'll post a pic oh the stoich afr it was giving me. Again, i'm new to this tuning stuff, so bare with me. Thanks! And looking forward to the replies. Hopefully i'm able to upload a pic!

Post #5 in this thread has ARJT http://www.gearhead-efi.com/Fuel-Inj...Information-42

Download and try the ARJT from the link above into TunerPro RT. If you get the same same Weird Values with the downloaded ARJT, try un-installing and re-installing TunerPro RT.

dave w

Did as you said, and i got the appropriate values. What could have been wrong with the bin i pulled from the prom i have?

May the HEX addressing? Start 000 / End FFF

dave w

I think i did as you said, and now i get 0's... is there something wrong that you can see?

The 1227747 computer chip needs to be set to the 2732A Chip setting on the Moates chip reader software. Then verify the chip addressing: Start 000 / End FFF

Attachment 13200

dave w

well, a leg just broke off the prom, so nevermind that. that upsets me. thank you for all your help though! i really appreciate it. ill try this again once i can get my hands on another prom that isnt running my truck hah.