Disabling PE Mode in $4E

Can anyone help me out in choosing the best way to disable PE in $4E bin? There are only four parameters that deal with PE they are Power Enrichment Spark Adder, Power Enrich vs Baro, TPS for Power Enrich, AFR for Power Enrich. So rather me just playing around with each I would appreciate some direct advice on how to disable this so I can get back to tuning :thumbsup:


Thanks, Logan

running the TPS threshold up to its maximum will disable PE(or only enable it when TPS is calculated to be 100%, depending if the code does a comparison using "greater than" or "greater than or equal to").