Astro 4.3L V6 TBI (1991)

Hi there GearHeads,
I was sent here by some nice people from the AstroSafari forum.
I saved an Astro (1991) after it was abadonned in the field for more than 6 years. Pretty succecfull as the van has passed technical examination and I've already driven 3000km since.
But it's not (yet) in top condition.
ecu is trowing tons of codes that I would try to read out with the paperclip method :)
Meanwhile I built a ALDL to USB cable (with arduino chip) that works with WINALDL
at least I get data-flow (rpm /tps ...)

But now I'm stuck .
I cannot get TunerPro or similar linked up?
What could be wrong ?

kr
Bob

What .adx / .ads file are you using with TunerPro RT.

If you have the 1227747 ECM you can find the .adx file here: http://www.gearhead-efi.com/Fuel-Inj...Information-42

If you have the 16144288 ECM you can find the .ads file (which needs to be imported into TunerPro RT) here: http://www.gearhead-efi.com/Fuel-Inj...Information-AO

What are your TunerPro RT preference settings for Data Acq. / Emulation?

dave w