Still checking, stumped...
Ok so I went through the proper pinouts for 16196395 like I had suggested. I looked at every pin that I could guess would effect starting.
E15, F15 are ignition and they do come on.
E16 is battery and it has power.
A1, A2 are ground and have no resistance to ground.
B4 map ground is good.
B3 Ect ground is good.
F6 says fuel relay control. I am assuming it grounds the low current side on the relay when triggered? Not sure how to test this.
B12 fuel pump signal. Not sure how to test this.
A16 Injector control 1. I assume it pulses ground to the injector 1.
A9 Injector control 2. Also assume it pulses ground to injector 2. Is there a way to test this?
F11 IC signal from ignition control module.
So I'm still at a loss but not giving up. Would I still have spark if the pickup coil was NOT working?