Serv No 16196396

Amazing site, guys!

I'm wanting to view the live data and possibly log my '95 K1500 5.7 litre 5 speed. The ECM is:
Serv No 16196396
BDUY

I've been doing a little digging and think I'm headed in the right direction, but it would awesome if one of you experienced guys would have a look. I was planning to buy a this ALDU1 CABL2 combo from moates:
https://www.moates.net/aldu1-and-cab....html?cPath=64

It is says it's for the '95. Is there something special about the '95 models that requires the unique combo?

I was planning to use TunePro RT v5 or is there something else that would work better? I've located a couple ADX files in threads on this site but I'm not certain they are the correct ones for my truck.

http://www.gearhead-efi.com/Fuel-Inj...ll=1#post17026

http://www.gearhead-efi.com/Fuel-Inj...ll=1#post33373

Will either of those work?

Thanks

The 16196396 is a kind of oddball. It is an older style ECM with 160 baud communication and no all in one memcal. You need the CABL1 combo instead.

Quote:

---

Originally Posted by mihela

The 16196396 is a kind of oddball. It is an older style ECM with 160 baud communication and no all in one memcal. You need the CABL1 combo instead.

---

Thank You! That makes sense, as I've crossed A & B on the ADL before to read the codes and noticed comments about that in the description of the CABL1 set. Will the ADF file reference above work for me? What live data is available on this ECM?

Quote:

---

What live data is available on this ECM?

---

you can open the adx in tunerpro without any vehicle connected to see the data list

Quote:

---

Originally Posted by steveo

you can open the adx in tunerpro without any vehicle connected to see the data list

---

Thank you!

Quote:

---

Originally Posted by mihela

The 16196396 is a kind of oddball. It is an older style ECM with 160 baud communication and no all in one memcal. You need the CABL1 combo instead.

---

I ordered the ALDU1 and CABL1 combo package. All I'm interested in doing at this point is viewing the live data and logging, but at some point I may want to take it further. If the 16196396 has no memcal, what does it have instead? Is the chip plug and play or one that requires de-soldering?

Sorry, double post.

Got the ALDU1 and CABL1 from Moates, installed the drivers and connected it to the truck. Oddly the dash board works but the list view does not. Any idea what that could be? Having the 10k mode enabled also caused the idle to increase and the truck to miss badly under load. Hope that didn't hurt anything.

Switched to a different laptop and that solved the problem. Works great now.

Does anyone have newer/better XDF and ADX files than the ones I've attached here?

Quote:

---

Originally Posted by KoolBreeze

Does anyone have newer/better XDF and ADX files than the ones I've attached here?

---

thnk you very helpful. i have ecm 16196396 and cant find any support for adx and only ne place i found xdf except for in this thread

I also have the BDUY prom coincidentally... also with a 5 speed manual... what are the odds lol

I have the same set up in my 94. Same ecm, stick shift, and 350 in a k1500. Any ideas on incorporating wide band data into the log on this ecm?

The only way I know of is using Moates APU1...
http://support.moates.net/autoprom-apu1/

It’s discontinued