Can this be done??
Thanks
Printable View
Can this be done??
Thanks
if the data is available in the datastream on your particular vehicle, and your ADX is set up properly, yep
Quote:
Originally Posted by steveo
Steveo, I’m guessing I can but I don”t know how to so I need some direction on this.
94 c2500 6395 ecm with a 4l60e. I want to delay the shifts and the 1/2 shift is sloppy.
The trans is all rebuilt and has the vette servo with all aftermarket parts..
Thanks
so that's $0E? there are transmission ADX files right in the 6395 info thread man. 0E is pretty well researched and documented
.. you have seen this thread, haven't you? http://www.gearhead-efi.com/Fuel-Inj...Information-OE
Sorry to bother you guys but I did not see that and I searched on here but I guess used the wrong words th search for what I need and I’m using $OD...Quote:
Originally Posted by steveo
Being as you have a 60e you will need to use $OD and the trans files will let you data log trans and show the dash for trans. In your OD bin will be a number of changeable lines for the trans. That area is where you can change shift points, lock up speeds etc, you can also change pressures for shift. I would caution to be careful what you do in some of the settings. No willy nilly lets try it and see what happens. The result might be boom.
Could also be $E6 mask...