Need Datalogging Help for 91 Corvette

Printable View

12-13-2014
aklim

Need Datalogging Help for 91 Corvette

I don't know what file to use. I have tried 3 different files this morning. Much more and the neighbors will probably throw me a "blanket party" tonight when I am sleeping.

Read my saga HERE. Trying to conserve space. TIA if anyone has the proper file so it doesn't have to cycle between DA Connected and DA Data Error.

Latest findings: Using A100 lists 6 squares for the "Dash" but not filled. Prom ID is correct but very slow in data acquisition since the values don't change. Refresh rate is probably very slow.

CaptainKawasaki's file: $8D-1227727-1990Corvette.adx shows all 8 gauges seems ok, doesn't show PromID but values are close to the others. Refresh rate is reasonable. Still cycles between DA Data Error and DA Connected

$8D-1227730-90-Y-Car-V1.adx seems ok too. Shows all 8 gauges, No PromID. Also cycles the same way as above.
My first born son will be up for trade for the right file. Will substitute for beer since I have no kids. LOL
So how to trust the values if it is in and out?
12-13-2014
dave w

7 Attachment(s)

I use an ALDL cable to data log with.

Attached are pictures of the Window 7 settings for my ALDL cable. My laptop is set up for Com 10, your laptop might be a different Com port.

I've also attached the $8D .adx file I use to data log with.

Hope this helps,

dave w
12-13-2014
aklim

Quote:

Originally Posted by dave w

I use an ALDL cable to data log with.

Attached are pictures of the Window 7 settings for my ALDL cable. My laptop is set up for Com 10, your laptop might be a different Com port.

I've also attached the $8D .adx file I use to data log with.

Hope this helps,

dave w

I will give it a try this evening. Thanks. Using Moates cable.
12-14-2014
delcowizzid

you may need to tick the cable echo box in preferences or it will oggle connected not connected as it reads the echo from the data the cable sent
12-15-2014
aklim

So far, Mangus has taken a file CaptainKawasaki used and cleaned it up some. After a bit of tweaking, it seems to work other than it loses packets of data here and there.

See the saga HERE. http://tunerpro.net/forum/viewtopic.php?t=3721