2 Attachment(s)
New guy on this "Hardware not found"
Hi.
I have built myself a test bench to be able to flash GM ecms. I am using an ELM327 Obd2 interface. I have the ELM327 plugin.
The problem is that TP RT says "hardware not found". When I press the connect button with power on ecm, I get about 40 Hz in the box down in the left corner. If I turn off the power, I only get about 5 Hz.
I know the ELM327 Interface works when I managed to get into ecm with other software.
Ecm I have is a 12200411 and will come from a 2002 Tahoe.
I'm new to this software but I would have been grateful for helping to get into my ecm.
Here is a picture of how it looks.
Attachment 12113
Have searched here on the forum but did not find answers to what I'm looking for.
If the post is in the wrong category, I apologize and admin can move it correctly.
Sorry for bad English.
Best regards / Alexander.