Going to help work on one of these soon.. anybody have a base line BIN they would not mind sharing?
7730 ECM $8d
Thanks
Printable View
Going to help work on one of these soon.. anybody have a base line BIN they would not mind sharing?
7730 ECM $8d
Thanks
Mebbe. What's your cam?
LPE 219 cam.
219/219
.525/.525
112 LSA
Why, yes I do.
AFR heads, Superram, LPE219, 30# injectors, 10.5:1 in an '86 Vette. Originally this was set up for street/strip with plenty of runs on street to dial in timing using oil temp with 89 octane. Strip usage resulted in poor launches due to insufficient traction so adjustments were made to delay PE and driver was instructed to ease into throttle and stay below 1/2 up to 2nd gear then ramp up to 100%.
86? Updated to the 730 ECM? Thanks for the baseline
Yep. Spent a few years working with the MAF but after I found out the owner was cranking fuel pressure 6-8 psi over stock on track days I convinced him to let me switch to 7730 / SD.
Hope it works for ya.
This seems to be working, but looks like BLMS are locked or it never allows for Closed loop?
Min coolant for closed loop is set for 298F
yep.. ALDLDroid worked well.. need to finish getting pieces for my BT module to try it