Printable View
Hello everyone, I have a lt1 94 trans am and recently I bought an aldl cable and installed eehack and tunerpro, in the same way I generate a file tuned from fbodytech but in the instructions it tells me to set the correct checksum and save the bin, I have no idea how to do that and I also do not know what the correct checksum is.
If someone could help me with this I would really appreciate it, since I do not want my ecu to be blocked or something
Just load it into tunerpro and resave it back out.
Mitch
so I do not need to edit anything manually?Quote:
Originally Posted by Terminal_Crazy
Tunerpro should calculate the checksum when it saves the .bin file.
Mitch
what instructions tell you that? any modern tool that works with $ee bins should set the checksum for you.Quote:
I bought an aldl cable and installed eehack and tunerpro, in the same way I generate a file tuned from fbodytech but in the instructions it tells me to set the correct checksum and save the bin
the fbodytech tuned file came with this text:
This bin is provided with no warranty. Here's what I've done:
** Selected 16210011, 1994 automatic base calibration
** Performed EGR Delete procedure.
** Disabled VATS
** Performed AIR Delete procedure.
** Performed traction control disable
** Performed AC delete
** Performed CCP Delete
** Configured for 4.10 gears
** Set auto transmission VSS type
** Tuning o2s for longtube headers
** Lowered fan turn-on points
** Tweaked wide open throttle tuning
** Set slightly rich o2 configuration.
** Applied aggressive timing table
** Configured improved idle for mild cam
** Set the correct checksums and saved the bin, done deal!
and the tool is red devil river aldl usb
Quote:
Here's what I've done
not 'here's what you need to do'Quote:
Set the correct checksums and saved the bin