-
4l80e speedo wiring
If there's any site out there that can help,it's you guys!! Im a new guy here, so if this is posted in the wrong area im sorry. I've got a 92 350/4l80e with a 16147060 ECM. I bought an aftermarket speedo and took a shot at wiring it up. My question is which wire do I hook signal to? I've got it hooked to the vssb (C15 lt blue/black) speedo signal. I looked on autometer's site and they show it hooked to the speed sensor. I checked the wires and their not shorted or broke and I have a new speed sensor. So my question is does it hook to (C12) or (C7) or do I have another problem? Thanks in advance for the replies:thumbsup:
-
VSSB is a buffered signal to dash speedometer, cruise control and ABS or? I think... that speedo you have wants direct VSS connection? 4l80E has TIS and TOS Input Speed and Ouput Speed too...
Check this thread for some good wiring diagrams.
http://www.gearhead-efi.com/Fuel-Inj...-427-PMC-OE-31
-
yeah you probably need to figure out if your gauge needs a direct pulsed ac signal to it. If so, you'll need to tap off the speed sensor off the back of the transfercase somewhere.
is this a 2wd or 4wd?
I am tuning my own 7060' You plan on tuning yours?
-
I porbably have the same speedo in my Camaro, I can check and see which wire I hooked up to it.