BURN 2 Reading proplem

I just started using burn 2 and am having problems reading 27SF512 chip, it is only showing 1 byte when I save it
and eveything shows up blank when I try and open it in TP. do i need to enter other values and what will I need to
set burn 2 to to read a stock factory memcal out of a 1990 corvette code ANHU.

OK i figured out how to read and copy the bin from my stock memcal using TP, ANHU for a 1990 corvette auto 2.59 gears
Here is a link https://drive.google.com/file/d/0B5d...ew?usp=sharing

However I am not able to read a memcal that has a 27SF512 chip in it. any tips appreciated.

Quote:

---

Originally Posted by eutu1960

I just started using burn 2 and am having problems reading 27SF512 chip, it is only showing 1 byte when I save it
and eveything shows up blank when I try and open it in TP. do i need to enter other values and what will I need to
set burn 2 to to read a stock factory memcal out of a 1990 corvette code ANHU.

---

Did you set the start and end channels to 00f000 and 00ffff respectively? The 27sf512 loads on the end as I understand it. Oh and don't make my first
mistake and type OHs for zeros. (0 vs O)

http://www.gearhead-efi.com/Fuel-Inj...Flash-and-Burn

Quote:

---

Originally Posted by uncabob

http://www.gearhead-efi.com/Fuel-Inj...Flash-and-Burn

---

OK using the 32k values worked. Thank You

This table will help also

Attachment 10901

MOC