$EE VE tables strange behavior

Who can explain me one thing
It seems weird

SD mode.
When I try to adjust some areas it influences adding/removing fuel in the whole range. But the values are the same.
For example i have a VE table with good cruising and idle fuelling but a little bit lean in heavy throttling areas. I can see it in logs.
I add some fuel in this area and take a run again.
And then i can see that Map 80-100 is not lean anymore. But idle and cruising areas are in lean conditions now. And i didnt touch that area at all.
Why is it so? I think it shouldn't work in this manner.

Try Open Loop and see if this behavior continous

it doesn't really work like that.

are you measuring the table with a wideband or are you using BLM trims

Both are showing lean. Wideband and narrowband. Whe the area was ok both showed ok

I mean i tried both
Im using wideband in PE areas and narrowband in CL