$0E injector flow

When increasing injector flow rate, is "Injectior Flow Rate (TBI lb/hr)" the only thing I need to change before doing any tuning? Running a '7427 with $0E.

Quote:

---

Originally Posted by DLV555

The next big thing I need to do is change my injectors. I'm running the stock injectors and need to step them up to the 80lb/hr injectors. At the stock 30psi, which I haven't yet verified, that should put me around 122lb/hr which should be adequate for this engine. Are there any good threads to read on that subject? My searching has not gone well.

---

Ass-u-me ing^^^this is what you're running with then, yes plug in 122 lb/hr. This should help with some of the richness if you were running with stock tune and larger injectors/increased fuel pressure.

Haven't got there yet. I wanted to make sure I knew what adjustments to make to the bin before I swapped the injectors.