Printable View
I have a Jeep truck with a 4.2L running a DIY GM TBI system. I gotta do some data logging but I can NOT get the lap top to talk to the truck. The #'s I'm getting back are all static and non moving.
I am using the Moates auto prom.
I have a recent definition (xdf?) File loaded.
Can somebody walk me thru the sequence? What windows to open, which buttons to press? I've done this in the past but it's been a while.
Thanks.
To datalog, you need an *.adx file. What ecm are you using?
Also see: http://support.moates.net/troublesho...apu1-autoprom/
7747 ECM
Here is an adx file http://www.gearhead-efi.com/Fuel-Inj...1&d=1375131735
Load the adx file by clicking Acquisition and Load definition file in tunerpro rt.
Have you confirmed your settings in tunerpro? The moates link I sent shows the switch settings and how to configure acquisition.
By confirmed you mean go into preferences? Yes I've done that. I followed the directions on Moates step by step and now I'm getting an error when I hit start/stop scan:just says connecting in a grey box. . . "Da:connecting"
That is the adx I'm using
I'd also like to add that I'm having no issues directly reading or burning chips.
Went thru the tuner pro preferences and verified the computer is seeing the auto prom on com 5.
Ok. In the windows control panel, what USB com port shows up?
Edit just saw your reply
Sending you a private message
I'm running the same ECU in my truck. I had a similar issue but have just gotten it to respond. Please PM me if you need help.