Printable View
Which wires go where??? I did dont get instructions on the wiring and have absolutly no idea what connections to make as the kit cam assembled except the wires to the controler. This is for a 1227730 ECu in a 1991 camaro. If anyone can help or show me where i can find a manual for a SCL diy2 kit that would be awsome since all i can find is a manual on the diy1 kit, which is older and different!
Thanks!!
i think a phone call or email to them is in order...
Or isn't the DIY1 kit same thing but unassembled? So instructions would be accurate...
yea the DIY 1 isnt the same, its not assembled. This one is assembled except the wires from the connectors are not. I will email them and hope i get a prompt message. This is really the last difficult thing to accomplish before I can start the car. Also the DIY has a 10 pin bar on the connector.. this one has a 4 bar, then a 3 bar then a 2 bar connector. So 3 seperate ones compared to the single connector the DIY 1 has.Quote:
Originally Posted by EagleMark
Ok I made a call and got a link to download the instructions, i assembled the cable that hooks from the WB sensor to the controler, took me 30 min. and alot of cussing, but i got that done, now I just need to make the power cable and ill be good to go. There are 2 aux. outputs on this thing but im not planning on reading anything but the AFR. Theres a 5vts output to what ever i choose. Can I hook this to my 1227730 ECU?? I know the $59 mask has a WB code in it.....
There's usually a 0 to 5 volt wire for Wide Band AFR reading. I tie it into my AutoProm, some guys have an extra wire into ECM. I don't know what to do with your ECM? It has USB to hook to laptop and software to read AFR right? I like it in same log as data log but can be done by itself.
Set up the WBO2 input as per instructions on code59.org. Pin F14 IIRC.
Yea it does have the usb cable to tie into the software i have. But I figured while i do the pin out for the TCC this weekend I could tie a input into the ECU.
Thanks sixshotter ill be sure to read up on code59 some more.
There is alot of functions and outputs/inputs that this kit can handle. I love it!
One of your extras should be an Exhaust Gas Temp sensor...