-
VE table questions
I'm running the 7747 ECM and using the VE Correction table spreadsheet for TunerPro RT.
On this spreadsheet there are 3 tabs at the bottom:
$42 VE correction table
Near Idle
Off Idle
I don't see near idle or off idles tables in my BIN on TunerPro so I only want to use the $42 table tab, correct?
Also, on that tab the NEW VE tables at the bottom have and averaged and without averaged BLM correction factor....Which one should I use?
Thanks!
-
You are correct, use the $42 VE Correction table. Near Idle and Off Idle are for the 2nd Generation TBI computers, like the 16197427.
The without average is a "course" tune adjustment when the BLM averages are more than 138, or less than 118.
The with average is a "fine" tune adjustment when the BLM averages are between 118 ~ 138.
dave w