Need help with TunerPro and Autoprom 7747 ECM

I'm running the latest version of TP and I have the Autoprom but I can't get it to datalog. I can get it to manually read a chip placed in the Autoprom but I can not get TP to talk to the car.

I *believe* I have it all set up correctly but am unsure. The data I'm getting shows all the gauges as fully pegged.

I've been reading tutorials over and over but can't figure this out.

Any help is appreciated.

What com port are you using?

Maybe the USB driver needs to re-installed?

dave w

what do you mean you say it won't talk to the car. It shows in the left hand corner that you are connected to the autoprom. but there is no BIN or XDF selected but the ADX is.