hey guys, new guy here using EBL and tunerpro

Hey guys, I am on a few forums, usually as Dman1987 or celiracer94.

I am from west texas and have a '90 454SS truck with a 496 stroker ('049 heads,NX262 cam, 10.1cr) running the TBI setup with an EBL ecu and using tunerpro for tuning(using EBL_V31.XDF).

I have just started and am just getting the hang of things, I figured some searching on here could help me get some power out of this engine

:welcome2:

Although we'd be glad to help! We are at a disadvantage because all the EBL files are not supposed to be posted on internet/forums.

But there is loads of help from Rbob over at Thirdgen for Dynamic EBL

:welcome: