I attached pics for a both a PROM Chip and an Ostrich 2.0 (should be similar for APU1).
dave w
Printable View
I attached pics for a both a PROM Chip and an Ostrich 2.0 (should be similar for APU1).
dave w
Ahh, missing g1 adapter
G1 adapter showed up,
Thanks blg355 for the installation instructions, a big help.
Does the g1 stay permanently installed?
Got the hardware installed and now I am stuck again.
Can somebody walk me through start up procedure.
Tuner pro recognizes my autoprom.
I think I need a Bin next.
Any recommendations on where I can find it?
Is there any way to save the information that is currently from the stock computer?
Correct me if I am wrong or tell me if I need more information.
Next I need a bin
Then I need to edit how much fuel will be now put into the motor (bigger pump with 18psi spring)
Then I need to change the spark tables to the vortec tables to get me close
Do I then edit AE?
What needs to be changed before I start this?
How do I go about changing them.
I still need to break in the motor and top off fluids.
Please help!!!
Haven't had the truck in two years I want to HEAR HER PURR
PS THANK YOU AGAIN
https://www.youtube.com/channel/UCtqEVXd8Yuhp18OIOIJIR4g
https://www.youtube.com/watch?v=vBpDu6l7GPE
https://www.youtube.com/watch?v=QaCIenLdOOM
https://www.youtube.com/watch?v=GDzeSi5nmoo
https://www.youtube.com/watch?v=lYPAK6fXScU
https://www.youtube.com/watch?v=TeEremD4Pfw
https://www.youtube.com/watch?v=eyD4OOfr900
https://www.youtube.com/watch?v=HpUaeiJYk3I
dave w
Dave,
Is code 59 your recommended for getting bin?
Is there any way to save my current setting in my truck for future reference?
The attached files are what you need.:thumbsup:
I've done a TON of work (over 1700 parameter changes) on the Modified BDKC 93 G-van 5.7 4L60e with 3.42 gears WBO2_E-Fans.bin file.
Download these files and your truck will run. You need to realize someone paid me $$$ for the file I posted.
dave w
Thank you again(again)
Do I upload this as a bin?
Do I use the spark tables you gave me earlier with it?
I hate sounding so green, but the help I have gotten here is all I have gotten.
I have books, links, quotes and references, unfortunately there is no manual for this
And as sorry as I am to say this, I haven't enjoyed a challenge like this in quite some time. :)
I completely understand how challenging all this can be.
Use the files I posted, they will get your truck running.
Once you get your truck running, we can plan the next step.
dave w
Dave,
Thank you, will try tomorrow
Dave,
Progress was well made today.
It needs to be dialed in, but I feel my truck is at 80- 90%
You have no idea how nice it is to run this thing.
I am having trouble with my thermostatic control (not computer controlled) and need to tweak a few things mechanically.
I looked at the injector flow that was entered before I started
Did you tweak it for me?
It was spot on :thumbsup:
Do I need to enter a new value for gear ratios because my differential has 3.73?
Attached is a data log for if you get the time.
Also please note that I do not have wide band