Printable View
Need some help here guys. Heres what im using. I have the APU1 burner package and the GP1 adapter from Moates.net for a Customers 89 T/A. I loaded a bin file using Tuner Pro and when I started the car up I got code 41. Anybody what could have caused this? Did I burn the chip wrong? Any ideas?
Do you have the original MEMCAL plugged into the side if the GP1 adapter?
I dont think so. Is there a way around this?. Also, the car does start and run, although it does need tuning. Its not in limp mode is it?Quote:
Originally Posted by Six_Shooter
You need the stock MEMCAL plugged onto the side of the adapter, for the hardware cylinder selected, along with LHM.There are ways around it, but requires jumpers and/or resistors to provide the proper hardware cylinder select.
I was doing some reading and As long as its a v8 memcal it should be alright. Before I burned the chip it was oo for v8.So it has to be the "original" memcal the car came with?