-
Okay i got the first harness done today.I eliminated the EGR knock sensors an the ESC . These things will turned off when computer is reflashed. For timing control i'm using the ignition module out of the GM distributor along with the GM coil to. ok here some pics of the finished harness
http://www.supermotors.net/getfile/1...315_150606.jpg
soldering wires
http://www.supermotors.net/getfile/1...315_150618.jpg
http://www.supermotors.net/getfile/1...315_160928.jpg
http://www.supermotors.net/getfile/1...161001-(1).jpg
http://www.supermotors.net/getfile/1...315_185138.jpg
I got it stand alone 2 grounds 1 batt 1 key on source. I will be using 2 relays on thw batt an key on wired
-
Okay with projects it seems like things always change or take a diffirent path .Well it has happened here Instead of doing my 72 F-250 first, i'm doing my 1978 Bronco with a 351m first
.http://www.supermotors.net/getfile/8...rebuild-52.jpg
This is the empty shell waiting for body and paint work
The harness i built seemed to fit perfectly so the rest of the parts i have collected over the last year for this GM TBI system are going onn the bronco . Don't worry I will still be doing the 72 F-250 it's just going to be awhile . I was able to get the throttle body mounted today on the edelbrock intake plus i got the map sensor mounted well i found a bracket that worked great so i used it , well enough babbling time for pics
http://www.supermotors.net/getfile/1...328_161301.jpg
one free 5.7 throttle body mounted on trans adapt part# 2210
http://www.supermotors.net/getfile/1...328_161316.jpg
had to trim bolts that hold throttle body to the adapter
http://www.supermotors.net/getfile/1...328_162649.jpg
test fitting on motor
http://www.supermotors.net/getfile/1...328_162723.jpg
http://www.supermotors.net/getfile/1...328_171348.jpg
map sensor bracket mounted
http://www.supermotors.net/getfile/1...328_171358.jpg
I think it looks oh so pretty lol well still got some more things to get and the bronco needs a ton of work like rewiring the whole rig . im going to use the the wiring harness kit from speedway so i will keep you all posted
-
2 Attachment(s)
Looks awesome!
Are going to use spark control? If so, are you interested in some helpful tips on modifying the Ford duraspark dizzy? Also, what:
heads
cam
intake
are you using? Parts of my tune might be helpful.
Attachment 8786
Attachment 8787
-
Yes i'm using the module out of the GM distributor with the GM coil I found a diagram on how to wire it to the ford duraspark dizy
heads are stock
cam stock
intake edelbrock performer
of course any help is always appreciated but the rig is a long ways from running i was just mocking everything up
-
-