TunerPro RT will not connect using current .adx and .xdf, usb port is good

new laptop, had to install all new software from beginning
Tuner Pro RT
using these files from gearhead-efi page that excel lookup sent me to: But will not connect when to 1227747 ecm with usb tft232 board. Anybody know why. Did I forget something?
Thanks Tyree

1227747http://www.gearhead-efi.com/Fuel-Inj.../paperclip.png Attached Files

• http://www.gearhead-efi.com/Fuel-Inj...attach/ads.gif 42.ads (36.6 KB, 399 views)
• http://www.gearhead-efi.com/Fuel-Inj...attach/ads.gif A033.ads (35.3 KB, 145 views)
• http://www.gearhead-efi.com/Fuel-Inj...attach/adx.gif $42-1227747-V3T.adx (66.0 KB, 534 views)
• http://www.gearhead-efi.com/Fuel-Inj...attach/xdf.gif $42-1227747-V4T.xdf (217.4 KB, 513 views)
• http://www.gearhead-efi.com/Fuel-Inj...attach/adx.gif $42-1227747-V5.2.adx (85.7 KB, 495 views)
• http://www.gearhead-efi.com/Fuel-Inj...attach/xdf.gif $42-1227747-V5.9.3.xdf (344.8 KB, 581 views)

In TunerPro, check under Tools-Preferences-DataAcq/Emulation and see if it's setup properly for your connection. I recently had the same problem on a new install and it turned out that the interface type wasn't selected. I don't remember having to do anything there on previous versions of TunerPro.

I got it figured out. I forgot some settings in tunerpro. Thanks all