Newbie question need help with BIN

Hello is anyone willing to give me a bin file for my set up or willing to put one together for me?
i would be greatly appreciative and so would my engine...
my setup
ecu 7427 with 4l60e chip bpsa
GM 383 stroker
procomp alum heads vortec 210cc runners 64cc chambers
howards cam 110051-10
duration 289/297 lift .488/507
op range of cam 2800-6000

i have a 5.7 tbi bored out 46mm going to buy 7.4 injectors or 5.7 with 18 psi what ever you guys suggest
any help is appreciated I have no clue how to tune..

If you really want an accurate start, you may want to consider contacting one of the vendors here and paying for a tune. Many people do this to get started and have the individuals that did the tune, walk them through how to datalog and fine tune the chip.

Great ideal I will do that Thx

I contacted tbi chips and was told that my setup was too powerful for TBI that I should stay with a carb...
Im bummed out I have everything ready to go. Does anyone have any advise for me? What are the tuning limits of a 454 tbi? Thanks

he's wrong, and not a very good tuner either. there are lots of people that could tune it for you, and there's no real 'limit' to how large of an engine you can fit a TBI setup to.

Thx Steve I bought all the. Wiring and ECU and 4l60e trans I just rebuilt I just know nothing about tuning..
li figured I could use a 454 tbi to get the airflow thanks for the info

Second on TBI not being able to handle it. I have and old holley dual TBI on a tunnel ram that i have been told will support 750 plus HP. the throttle bodies are just like the GM 2bbl units so he's in the dark.

Nice I'm bidding on a 7.4 L tbi on eBay now