is your manual a digital copy?
Printable View
is your manual a digital copy?
No, I copied and pasted that out of si2000. No more info or pics in the book on the topic. Pm me your email, ill forward you a couple technical drawings, dont get your hopes up.
You can post just about any attachment here. If not zip it. Under quick reply you see Go Advanced, when there under the text box is Attachment manager.
Some large internet forum groups do have attorneys on staff to advise. So they play the safe side. If GM cared half the internet would be shut down. Tuning itself is GM computer systems hacked... So it's OK, but it's your choice.
In about 14 years of doing auto forums I've never been contacted for anything posted.
Found this on another forum
that's not a shortstar crank, the short* has a split pin crank.
I think it's a 4.0, but it's a good shot of reluctor which is supposed to be the same between3.5 and 4.0
Mechanicman---I just matched up the tooth assignment of the pic you posted with a 7.4 Coil Near Plug 24x reluctor and they are NOT the same. I don't know if that helps in any way but I thought I would post up.
Jeff
found an interesting bit of info, both LX5 and LSx ignitions wire up in a similar manner, but the LX5 uses one large ICM, and the LSx engines use ICM's integrated into the coil. for someone wanting to do a coil per cylinder swap while retaining a cable throttle, the best option may be a trigger swap and LX5 programming with the LX5 PCM. as an added bonus, the LX5 PCM uses the same case as a 0411, so it would "bolt in" just need connector ends swapped, and pins moved.
LSx
http://i473.photobucket.com/albums/r...tem_Bank_1.gif
http://i473.photobucket.com/albums/r...tem_Bank_2.gif
LX5
http://i473.photobucket.com/albums/r...ortstarign.png
Been a hair over a year since the last post and I was wondering if anyone has made any leeway on this idea?
I find it a tiny bit surprising that as popular as 6 cyl engines are today, and as popular as the 411 still is, that no one has figured out how to make a 411 run a 6cyl with coil per cylinder.
Could the V8 24x trigger wheel be used and then some code changed to make it fire 6 cylinders instead of 8? I know on a lot of the OBD1 stuff we fool around with on here, a V8 bin can be changed to run a V6 without much problems by just changing the cylinder numer in the bin. But its all mainly based off DRP's and are not sequiential, so I figure it wouldnt be as easy as changing cylinder count.
I have been google searching it a while and have not come up with much. About the best I have come up with was I found a thread on some site where a guy was trying to do this with a 411 on some import car. It was suggested to use a E67, harness, coils, 58x wheel, etc... from like a 06 and up trailblazer with a vortec 4200. Sounds interesting, but that puts it out of reach for most with low budgets, as it would require the expensive tuning software/hardware. Thats what makes the 411 more appealing, is has just become a little more affordable with the release of the flash tool.
I'm using a $250 used DHP unit to tune my V6, what are you trying to run, a 4.0?