Need Education in Modifying ADX to show Transmission Filter Temp ($0D)
Sometimes I'm more stupid than normal, but this is the case... I don't know what I know.
Using ADX: 217_OD_V217 for tunerpro. I want to see the Transmission Filter Temp (Pin B5). I added this item into values, with address 0x41, 65, 8 bit. I grounded out B5 to ground and no indication. Its not that simple I'm sure, because its suppose to be in the datastream so we can pluck it out... right?
I got the 0x41, 65 address from the trans1 ADX on tunerpro site.
Where did I go wrong and were do I need to go. I was going to use this to monitor oil temp and not have it modify the run as I am in a Corvair, so as long as it does not modify engine..... I'm good.
Ted Brown
Anderson, SC
Adding fields into the ADX/Packet offset
I guess to re-ask my question, how do I know what the packet off-set is for my Trans Temp (Pin B5) in the current ADX? It appears it not 0x41. I get readings using the Trans ADX from the TP downloads.
Ted Brown
Anderson, SC