Question on OS and which BEN file for OS12208322

Im sorry if this has been answered before, I looked and looked for it.

I have a unknown tune in a 12200411 PCM with a O/S12208322 BIN file loaded on it for a 4.8 motor. The motor that it came with is a 5.3 (verified with bore scope).

My question id this; Can I ONLY use BIN files written for the O/S12208322 system or can I us another BIN files made on a PCM that has a different Operating System? Thank you for your help! Motor is a 5.3 with 76mm turbo, 60lb injectors and a LS1 cam (unverified) Car will start but is pig rich rich and wont stay idling floods out and dies. Needing to load a base tune for a 5.3. Thanks again.

Mark

There is a segment for 5.3 with that OS. Look for 2001 truck bin with 5.3l engine. The engine segment p/n is 9357818 for 2wd or 9357822 for 4wd.

You can segment swap your current bin or start with new fresh bin with that OS for 5.3l.

Thank you so very much!!

Kur4o

Quote:

---

Originally Posted by kur4o

There is a segment for 5.3 with that OS. Look for 2001 truck bin with 5.3l engine. The engine segment p/n is 9357818 for 2wd or 9357822 for 4wd.

You can segment swap your current bin or start with new fresh bin with that OS for 5.3l.

---

Can you help me out with finding this file? I'm seeing a bunch but I'm not sure I'm looking at the right one. I hate to ask, I've looked and looked and searched for p/n is 9357818 and I'm not finding it. Again sorry to ask, I hate when folks don't try to look first ask second. I've looked and I'm just lost lol. Thank you!!

All the files you need are here
http://www.gearhead-efi.com/Fuel-Inj...rPro-Bin-Files

The p/n is hard to find because most files are not labelled with it. The are labelled by OS number and this is engine segment cal number.
To see it you need to open the bin and check the segment part by some tuning software or some freeware that can be found here
https://github.com/joukoy/UniversalPatcher

Thank you Kur4o. I very much appreciate your help. I found the Calibration Segment using Tuner Pro and found the p/n one. Again thank you!