Hello.
Old thread but can you share the ADX file, im having exact same problem as superbee.
my dashboard does not save in Aldldroid.
Thanks in advance
/ Johan
Printable View
Hello.
Old thread but can you share the ADX file, im having exact same problem as superbee.
my dashboard does not save in Aldldroid.
Thanks in advance
/ Johan
Which ADX file do you need exactly ?
and which problem are you having exactly ?
Hello.
In need the ADX file for Code 59 XDF definition for Tunerpro 5.
the problem is that i cant save/load my custom dashboard, exactly like the user superbee on page 62 in this thread.
see this link, https://www.youtube.com/watch?v=aH-ysv6ms1U
The ADX file you should be able to get it there: http://www.code59.org/index.php?action=downloads;cat=2
For the dashboard not saving issue, you're using which versin of the app ? This has been fixed few months ago I believe...
Can anyone help with this? I posted this in a rather old thread, but hoping by posting it here it gets a bump.
Thanks for any help!
http://www.gearhead-efi.com/Fuel-Inj...ll=1#post70362
Hello.
I just downloaded the app from goggle play about 2weeks ago, has to be the latest one?
can you load the files into aldldroid and see if you get the same problem?
the link is for my .bin and 2 .adx files that i tried.
https://1drv.ms/f/s!AjGaA8t-0rZDjk01mhPGZpJZXPk3
/ Johan
Just figured it out with your ADX file, there was indeed still a bug when creating dashboard page from ADX file when there is a single gauge on the page. I just fixed that so it will be fixed in the next app version. In the mean time, if you remove the first two dashboard pages in your ADX, the app should be able to save your dashboard. I've attached the modified ADX file for you.
Thank you
Thank you, i will give it a try later this night
Johan
Load the adx file into tuner pro using the Acquisition on the Menu.
Open it with edit ADX the two little cog wheels icon.
Go to dashboards in the menu and select dashboard and delete.
Exit and save.
The dirty way is to open the adx file and remove by edit not recommended.
MOC
Hello just a quick question. Engine temp and coolant temp are displayed both in Fahrenheit right? Only reason I ask is engine temp is 200ish and coolant is 90ish , the sensor is new twice over lol . It would suggest a stuck open thermostat?
I'm not sure what you are using to test with but 200F is 93C.
So if you are using an ADX file coolant may well be read in Celsius for that sensor in this instance.
Note: that a lot of ADX files are set to read both F & C via a lookup table, you may have associated with the wrong parameter.
From what you have said there is a good chance you have one reading in F and the other in C
MOC
Thank you, that worked!!
Now i just have one small issue left, there seem to be a small glitch in the connection, see this youtube video https://www.youtube.com/watch?v=C3Lc-0kpeUo
I read that if you enter a 20ms pause, but how do i insert this. it seems im missing alot of commands im my .adx file
Attachment 12859
Johan
Glad that worked.
I'm not real good on 8192 baud rate, I've got 160 baud. What you could do is check out other similar ADX files for their command structure and try it. Even try other ADX files that suit your system. Then edit or add commands in the tuner pro editor.
If you try adding commands in or editing using tuner pro make sure you keep a good working copy of your ADX file some where else. It is to easy to go forward and then destroy your copy and not be able to get back to base.
Keep reading and testing you will get there
MOC
If the red message that flashed at the bottom of the screen is "No response from ECU" (video is too blurry for me to tell), most likely the timeout of the listen command is too low.