Originally Posted by
busta9876
I've been looking for a PCB to solider a PSOP44 flash chip to, and on other side of the PCB have a female header that will plug into the header pins that Moates sells for the roadrunner installation. This way you would solve the vibration issue of using a ZIF socket for the chip for semi permanent applications.
If you can find/build the PCB, then you need is a header your eprom progammer. You'll be able to quickly remove/install the eprom to make changes. I currently have a cheap hot air rework station from ebay, and a willem gq-4x programmer. It handles the intel / amd 28f400 and 28f800 chips no problem. I use this process for eprom recovery, clone pcm's s/n and so on.